Chapter 3 Accessing Netcam Sc; Viewing Netcam Sc's Images - StarDot Technologies NetCam SC User Manual

Chapter 3
3.1

Viewing NetCam SC's Images

Any Java-enabled browser can be used to view the live images.
Type NetCam SC's IP address in your browser's address bar (example:
http://192.168.1.5). Or use StarDot Tools to Find the camera's IP
address.
Window Size
For most viewing, the window size should be set to 100%, which is a
pixel to pixel match of the image resolution. If you select 50%, the width
and height will be browser resized to 50% of the actual image resolution. If
you select 200%, the width and height will be browser resized to 200% of
the actual image resolution. This does not affect the actual image resolution
which is set on the image configuration menu (Section 3.3).
Mode
This determines which method is used to watch the live video:
Pull - Java applet "pulls" the live images via web port (usually 80)
Push - Java applet receives motion JPEG stream via port 8001
ActiveX - receives motion JPEG stream via port 8001
.NET - receives motion JPEG stream via web port (usually 80)
Page 10
Accessing NetCam SC
NetCam SC