StarDot Technologies NetCam SC User Manual page 25

Manual Time Set
If you don't have access to a time server, you may opt to manually set
the camera's clock. You can do this in one of two ways. Using the Sync
button, you can synchronize the camera's clock to your PC's clock. You
may also manually modify the time and date in the Date/Time box. In either
case, be sure to hit the Apply button after you've set the time.
TIME ZONE
NetCam SC integrates your current time zone into the time/date string
and can even automatically adjust for daylight savings time. Type in the time
zone code from the list on this page. If your time zone is not listed, enter
your abbreviated time zone followed by the number of hours you are behind
GMT (if you're ahead of GMT, add the "-" character before the value).
HST10
AT10ADT
YST9YDT
PST8PDT
MST7MDT
MST7
CST6CDT
EST5EDT
AST4ADT
NST3:30NDT
WET0WETDST
PWT0PST
MEZ-1MESZ
MET-2METDST
SAST-2SADT
JST-9
WST-8:00
CST-9:30
CST-9:30CDT
EST-10
EST-10EDT
NZST-12NZDT
NetCam SC
Hawaiian Standard Time
Aleutian Standard/Daylight Time (Alaska, parts)
Yukon Standard/Daylight Time (Alaska, parts)
Pacific Standard/Daylight Time
Mountain Standard/Daylight Time
Mountain Standard Time (Arizona)
Central Standard/Daylight Time
Eastern Standard/Daylight Time
Atlantic Standard/Daylight Time
Newfoundland Standard/Daylight Time
Western European Standard/Daylight Time
Portuguese Winter/Summer Time
Mitteleuropaeische Zeit/Sommerzeit
Middle European Standard/Daylight Time
South African Standard/Daylight Time
Japan Standard Time
Australian Western Standard Time
Australian Central Standard Time
Australian Central Standard/Daylight Time
Australian Eastern Standard Time
Australian Eastern Standard/Daylight Time
New Zealand Standard/Daylight Time
Page 25