StarDot Technologies NetCam SC User Manual page 29

embed special characters in the phone number.
, = pause one second
# = same as # button on phone
* = same as * button on phone
Timeout
NetCam SC will attempt to dial up the ISP for the specified number of
seconds. If NetCam SC is unable to connect during this time period, it will
stop and start over again.
Default: 180
Username
The username or login assigned to you by your ISP.
Password
The password assigned to you by your ISP.
Default Connection
Enabling this option makes the ISP dial-out connection NetCam SC's
default connection to the Internet.
Default: On
Always Up
If enabled, NetCam SC will attempt to stay continuously connected
to the Internet. If disconnected, it will automatically attempt to reconnect.
If NetCam SC is configured to upload images to a server via FTP, it is not
necessary to enable this option; NetCam SC will automatically attempt to
dial into the Internet when an image is scheduled to upload if dial-out is
enabled.
Default: Off
Send CR After Login
This advanced ISP option tells NetCam SC to send a CR (Carriage
Return) after logging in. Most ISP's do not require this.
Default: Off
Shell Login
This advanced ISP option tells NetCam SC to perform a shell login.
Most ISP's do not require this.
Default: Off
NetCam SC Page 29