Fueling The Mv8 - ILMOR MV8 Owner's Manual

Section 3

FUELING THE MV8

A DANGER! Never start the engine if a gasoline odor is present or
if gasoline can be seen at any point along the fuel line, along the
fuel tank, in the bilge or at the engine. Remove the key from the
ignition switch and call an authorized boat and/or certified Ilmor
dealer for service. Take care not to spill gasoline when fueling.
If gas is spilled accidentally, wipe up all traces with dry rags
immediately and dispose of rags properly on-shore. Gasoline and
its vapors can cause an explosion.
A WARNING! Always replace parts of the fuel system with Ilmor-
authorized parts only. All fuel system lines and connections must
meet the requirements of U.S. Coast Guard (USCG) regulations.
This means that hoses must meet or exceed SAE Standard J1527
DEC85, and hoses used for fuel delivery must meet or exceed
specification in USCG regulations, Sec. 183.540 for recreational
boating. Additionally, all fuel hose must meet the 15 g/m
fuel permeation. All plumbing for the fuel system on Ilmor engines,
and the boats in which Ilmor authorizes placement, meet or exceed
all requirements.
A WARNING! Always inspect the entire fuel system for leaks and/
or deterioration prior to each outing. This inspection becomes
even more critical after substantial periods of nonuse or storage.
Be certain the inspection includes the fuel tank, fuel lines, fuel
pump, regulator, fuel rails, carbon canisters and all fittings in the
system. Never operate the engine when any component shows
even slight signs of corrosion, leakage, deterioration, swelling,
hardening or softening. This must be brought to the attention of a
certified Ilmor and/or boat manufacturer's dealer for replacement
prior to using the boat.
WARNING! Always inspect the entire fuel system for leaks and/or
deterioration prior to each outing. Because the system found on your
boat has been developed for use specifically in a marine environment, a
number of safety measures are incorporated in the entire fuel system from
tank to lines to connections. Please note that, as a result of the pressurized
fuel lines, there are no user-serviceable parts.
WARNING! Always replace parts of the fuel system with Ilmor-
authorized parts only. Any service required in the fuel system must be
performed by authorized service personnel only as they will have the
specialized tools and replacement parts that meet the manufacturer's OEM
specifications.
Ilmor recommends a daily inspection to ensure that no fuel lines are
leaking. Never start the boat if there is evidence of fuel leaks or fumes.
© 5/2013 Ilmor Marine, LLC, Version 1.0
limit for
2
3-1