Panasonic KX-NS700 Operating Manual page 2

Feature Highlights
Feature Highlights
IP Communication
This PBX supports IP communication using
a variety of IP telephones, such as the KX-NT300/
KX-NT500 series with Self Labeling and/or
R
Bluetooth wireless headsets, Panasonic IP
Softphones, and SIP phones.
IP Proprietary
Telephone
IP Softphone
Consult your dealer
Remote Office
This PBX supports the use of SIP phones
connected from a remote office over an IP network
through an SBC (session border controller).
SIP phones can be set up by simply connecting
the phones to the LAN at the remote office.
Consult your dealer
Wireless System
This PBX optionally supports a Portable Station
(PS) system. PSs can be used in the PBX
with other wired telephones.
1.3.79 Wireless XDP Parallel Mode (Page 170)
2 Operating Manual
SIP phone
IP Network
Easy Operation
A Panasonic telephone that is equipped with
a Navigator Key/Jog Dial and a display helps
you to access desired features easily. Also, you
will be informed of the arrival of an incoming call
or a message waiting by the lamp if it is equipped.
ENTER
Navigator Key Jog Dial
1.1 Before Operating the Telephones
(Page 14)
Cellular Phone Features
This PBX supports the use of cellular phones
with the PBX. Cellular phones can make and
receive calls as if they were registered
extensions.
1.5 Cellular Phone Features (Page 184)
Built-in Unified Messaging
You can set incoming calls to be redirected to
your mailbox to let callers leave voice
messages when you are unable to answer the
phone. You can access your mailbox to listen
to the messages when you are away from the
office as well.
1.6 Unified Messaging Features (Page 188)
Document Version 2014-11
Message/Ringer Lamp
Hello, this
is John Smith.
Please leave
your message.