Panasonic KX-NS700 Operating Manual page 222

1.6.5 Transferring Calls
•
* This option is announced only if you are authorized to use it through system programming
for PBX COS (Class of Service) settings and UM COS settings. For more information, consult
your System Administrator.
Assigning and Canceling Telephone Numbers for Call Transfer to CO
Line
When you assign a telephone number for Call Transfer to CO Line, your calls will be transferred to the assigned
telephone number when:
•
You have set Call Screening (refer to "
•
You have set Disable Call Transfer (refer to "
To assign telephone numbers for call transfer to CO line
PT/SLT/PS/SIP Extn.
Log in to your mailbox.
outside party's
Dial the outside party's telephone number
(max. 32 digits including CO line access number).
To cancel telephone numbers for call transfer to CO line
PT/SLT/PS/SIP Extn.
Log in to your mailbox.
•
This feature must be enabled for your mailbox by the System Administrator.
•
If you are using a PRI line, you may need to enter # at the end of outside telephone numbers.
Consult your System Administrator for more information.
Voice Mail Transfer
If you cannot answer calls, you can forward them to your mailbox. You can select the type of incoming calls
(Intercom Calls/Outside Calls/Both Calls) that are forwarded.
If your telephone has a Message button, the Message light turns on when a message is left in your mailbox.
You will hear an indication tone* when going off-hook, regardless of whether or not your telephone has a
Message button.
222 Operating Manual
5 6
Enter 56.
If you have already stored a telephone number
and wish to change it, press 1 before continuing.
telephone no.
5 6
Enter 563.
Call Transfer").
Call Transfer").
CO line access no.
Enter the CO line access number
needed for making outside calls.
2
Enter 2 to accept.
3
On-hook.
On-hook.
Document Version 2014-11