Removal Preparation - Nanni T4.155 Workshop Manual

60300140( )
indice A

REMOVAL PREPARATION

1- REMOVE THE ENGINE FLY WHEEL
2- INSTALL THE COMPLETE ENGINE ON AN
APPROPRIATE SUPPORT IN ORDER TO
DISASSEMBLE IT
3- REMOVE THE TIMING BELT AND THE TIMING
PULLEYS
4- REMOVE THE CYLINDER HEAD
5- REMOVE THE ALTERNATOR AND THE
ALTERNATOR ATTACHMENT PLATE
6- REMOVE THE WATER PUMP
7- REMOVE THE TIMING GEARS
8- REMOVE THE INJECTION PUMP
9- REMOVE THE ENGINE LOWER CASING AND
THE TIMING GEAR CASING (OIL PUMP)
10- REMOVE THE OIL RADIATOR
11- REMOVE THE WATER INTAKE PIPELINE AND
THE THERMOSTAT
12- REMOVE THE WATER TEMPERATURE SENSOR
13- REMOVE THE ENGINE SUSPENSION
ATTACHMENT PLATE
14- REMOVE THE PLUG
4 CYLINDERS WORKSHOP MANUAL 162/191