Remove The Oil Strainer; Remove The Oil Pump Timing Casing - Nanni T4.155 Workshop Manual

60300140( )
indice A

10. REMOVE THE OIL STRAINER

Remove the two attachment bolts, two nuts and the oil strainer and
gasket

11. REMOVE THE OIL PUMP TIMING CASING

Before removing the two nuts securing the injection pump flange on
the timing casing, verify that the timing lines coincide correctly.
Otherwise mark alignment marks to facilitate reassembly.
Remove the two attachment nuts
Remove the eight assembly bolts and the coupling bolt.
Use a plastic mallet to softly strike the distribution casing.
Remove the three o-rings
4 CYLINDERS WORKSHOP MANUAL 147/191