Fresh Water Pump And Water Sensor; Checking The Water Temperature Sensor - Nanni T4.155 Workshop Manual

60300140( )
indice A
1. REMOVE THE WATER TEMPERATURE
2. VERIFY THE WATER TEMPERATURE
Use the special maintenance tool SST to verify the
resistance between the terminals using an ohmmeter.
Resistance: (Refer to the diagram)
If the resistance is not within the limits stipulated in
specifications, replace the water temperature sensor
3. REINSTALL THE WATER
4 CYLINDERS WORKSHOP MANUAL
CHECKING THE WATER
TEMPERATURE SENSOR
SENSOR
SENSOR
TEMPERATURE SENSOR
132/191