Network Remote Control Options - Roberts Stream 83i User Manual

Network remote control options

Network PIN setup (PIN number)
Your radio has the option of being controlled by an application installed
on an Apple iPhone, iPod touch or iPad. The PIN number facility allows
you to ensure that your radio can only be controlled by your own Apple
device rather than someone else's.
Details of how this feature can be used with your iPhone or iPod touch
are explained in the separate documentation available from the Roberts
Radio Website. The remote control app is called ConnectR and is available
from the Apple App Store.
Keep network connected
By default, your radio will shut down its WiFi or Ethernet connection when
it is in standby. This minimises power consumption but it does mean that
you will need to switch the radio on manually in order to use either the
'Play to' function or any other remote control software.
If you need to be able to remotely control the radio even when it has been
put into standby, then you can choose to keep the network connected by
using the 'Keep connected' option in the Network Settings menu. In the
standby mode display the WiFi signal indicator is shown with or without a
cross through it, or the Ethernet connection indicator is shown unplugged
or plugged in, according to the chosen setting.
19