Information; Factory Reset - Roberts Stream 83i User Manual

Information

Factory reset

If you wish to completely reset your sound system to its initial state this
may be performed by following this procedure. By performing a factory
reset, all user entered settings will be erased.
1. Access the menu for the current mode by pressing the Menu button.
Rotate the Tuning/Select control to highlight the 'Main menu' option,
then press the control to select.
2. Rotate the Tuning/Select control until 'System settings' is highlighted
and then press the control to select.
3. Rotate the Tuning/Select control until 'Factory Reset' is highlighted
and then press the control. Rotate the Tuning/Select control and
highlight 'YES' to proceed.
If you do not wish to carry out a system reset, highlight 'NO' and then
press the control. The display will revert to the previous menu.
4. With 'YES' highlighted, press the Tuning/Select control. A full reset
will be performed and the sound system will restart as if fi rst plugged
in. The DAB stations list together with any preset stations will be
erased and your wireless network connection details will be lost. All
confi guration settings will be restored to their defaults, the clock and
alarms will be reset.
In case of malfunction for any reason, reset the product as described
above to resume normal operation. It may be necessary in some cases to
disconnect the mains power, then reconnect power after 10 seconds.
In case of malfunction due to electrical fast transient (burst), reset the
product as above (reconnection of the power source may be required) to
resume normal operation.
If you need any further advice, please call our Technical Helpline on 020 8758 0338 (Mon-Fri)
1
1-4
Information
90