Roberts Stream 67L - Smart Audio System Manual

What is in the Box?

Smart Audio System, mains lead, remote control with 2 x AAA batteries, quick start guide, safety/warranty guide. Please scan the QR code on the product for the FULL User Guide online.
Please read this guide and safety/warranty guide before use.

Features

• Internet / DAB+ / FM radio
• Streaming: Spotify, Deezer, Amazon Prime music
• Bluetooth
• CD, CD MP3 / CD WMA compatibility
• Play MP3 or WMA files via USB
• Two mid-treble speakers, two bass speakers (with ported chambers)
• Control via the UNDOK smartphone app (for Apple iOS and Android)
• 10 DAB, 10 FM presets and 40 Internet radio presets
• WiFi and Ethernet connection (Dual-band WiFi and Ethernet)
• 5 equaliser profiles plus User EQ mode Scan for full instructions.
• Clock and dual alarm (wake to Radio / CD / buzzer)
• USB charging of smartphone, tablet or similar devices
• Auxiliary input and headphone socket for private listening

Controls

1. Volume
2. Repeat / Shuffle
3. Previous (RW)
4. Play/Pause / BT Pair
5. Next (FF)
6. Stop / Eject
7. Tuning / Select / Snooze
8. Back
9. Menu
10. Preset
11. Info / Dimmer
12. Alarm
13. On / Standby / Sleep
14. Mode
15. IR sensor
16. Display
17. CD slot
18. Mid treble speakers
19. USB playback / charge
20. Auxiliary input
21. Headphone socket
22. Ethernet socket
23. Power input
24. DAB / FM telescopic aerial
25. WiFi antenna
26. Sub-bass speakers x 2
27. Bass reflex ports x 2
    
    
28. Remote control

Connect to the mains & setup your smart audio system

Before you can use your smart audio system you need to have the following:

• For FM/DAB: A suitible location for good radio reception
• For Streaming / Internet Radio: a good WiFi signal or ethernet connection (802.11b, g, n or a) connected to your broadband Internet service provider. You will need the security details to connect the Stream67L to your WiFi network. Password will not be required for a wired connection.
• For App control: An Android or Apple device with the UNDOK app installed.

Connect to the mains

Please read the safety leaflet provided before connecting your smart audio system to the mains. The mains plug is used as the disconnect device, The socket-outlet shall be installed near the equipment and shall be easily accessible.

1. Place your audio system on a flat surface.
2. Plug the mains lead into the mains socket on the back of the unit.
3. If you wish to use a wired connection, plug the Ethernet cable into the socket at the back of the unit.
4. Plug the mains lead into a wall socket and switch on the socket.
5. The display on the audio system will show a start up screen for a few seconds. If this is the first time that you use your audio system (or after a Factory Reset) the display will show the language menu.

Setup using the audio system or the UNDOK app

Your audio system may be configured using either the display and buttons on the unit or using the UNDOK app. First-time users are recommended to use the audio system's controls.

1. If you wish to use UNDOK to setup your unit, skip to step F now.
2. If you would like to setup using the audio system's controls follow the setup procedure below and choose the desired language.

Select language

By default your audio system will display all menus and messages in English.

1. Rotate the Tuning/Select control to highlight the desired language.
2. Press the Tuning/Select control to enter the selection.

• Your audio system will display a privacy policy. Please read the privacy policy and then press the Tuning/Select control to accept the policy.

Select clock and time settings

1. The audio system will show a setup wizard. With 'YES' highlighted press the Tuning/Select control to begin setting up your product.
   Note: If you wish to go back within a menu or if you make an error at any time, please use the Back button.
2. Choose either the 12 or 24 hour clock display.
3. A menu allowing you to specify the auto-update option for the clock will be shown. Update from network will be the best for most users.
4. Choose the timezone for your region.
5. Choose a daylight saving option. This is also known as Summer/ Winter time (or BST/GMT in the UK).
   

Connect to your network

To stream music or listen to radio from the Internet you must connect your system to your WiFi or use a wired network connection. The Network setup process allows you to do this:

1. Choose 'YES' to keep the unit connected to the network when in Standby. This will allow remote control software to switch on your audio system when needed.
2. A list of the available WiFi networks will then be displayed. If no networks are found then your audio system may be too far from your router.
3. Rotate the Tuning control to navigate the list of available networks and highlight your own Network Name. If your Network Name is not found, then check the router is functioning and that the audio system can in good signal range.
4. If your Network Name (sometimes called SSID) is displayed with "[WPS]" (WiFi Protected Setup), then press the Tuning control and a WPS menu will be displayed, otherwise press the Tuningcontrol and proceed to step 6.
5. Choose one of the WPS menu options as required for your router (WPS may be via push button, or using an identification number):
   'Push Button' - the display prompts you to press the WPS button on your router and then the Tuningcontrol on the unit. The two devices should then connect automatically. Proceed to step 10.
   'PIN' - the display shows an identification number which you must enter into your router using a web browser (refer to your router's user documentation). You should then press the Tuning control on the unit. Proceed to step 9.
   'Skip WPS' – if you wish to enter your password or if your password was previously entered.
6. If you are prompted to enter a password (or key), enter each character by rotating the Tuning control to highlight it, then pressing the Tuning control. If you are not prompted for a password then proceed to step 9.
7. The three controls on the right-hand side of the password key screen have special functions. You can quickly access these by pressing the Info button and then using the Tuning control as needed:
   Select 'BKSP' - Select to erase a character (long press to clear).
   Select 'OK' - When the complete password has been entered.
   Select 'CANCEL' - To cancel and re-run the Network Wizard.
8. After the final character of the password has been entered, highlight the 'OK' symbol and press the Tuning control.
9. The screen will show 'Connecting..' and then 'Setup wizard completed'. Press the Tuning control to exit the setup wizard. The audio system should now be able to connect to the network. Your audio system will display the Main mode menu.
   

Use the UNDOK app to setup your audio system

1. If you wish to setup your audio system using the UNDOK app download and install the UNDOK app on to your Android or iOS device.
   
   
   
   
2. Follow the on-screen instructions or see the full user guide on-line (scan the QR code on this documnet with your phone).
   • If you already have the UNDOK app installed on your device ensure that you have the latest version.
     

Navigating your smart audio system

A short press will switch your audio system On or to Standby.
A long press will access the sleep timer (on the unit) when playing.
A short press will cancel an active alarm.

A short press will access each operating mode in turn. Turn the tuning dial to skip through the modes more quickly.


A short press will access or exit the current menu system.

Rotate clockwise or anti-clockwise to scroll menu items or Left / Up / Right / Down buttons on remote control.
A short press on Tuning/Select or the select button (remote control) will select highlighted menu items.
A short press on Tuning/Select or the select button (remote control) will access snooze when an alarm sounds.

Press the Back button (or menu on remote) to go back to a higher level menu or if an error is made.

A short press will display information relating to the music being played.
Long press to adjust the brightness of the display (short press when in standby to adjust brightness).

A short press will change alarm status when the unit is in standby or playing.
A long press will access alarm settings when the unit is in standby or playing.

Operating your smart audio system

Select music mode

Choose a listening mode:

1. Pressing Mode gives you access to each of the operating modes. Press again or turn the select control to select a new mode. Push the tuning dial to select a mode and return to the main screen.
2. Press Menu to access the full menu for the current operating mode.
   

System settings

You can access 'System settings' from the current menu. The system settings include Equaliser, Subwoofer, Streaming audio quality, Network, Time/Date, Brightness, Inactive standby, Language, Factory reset, Software update, Setup wizard, Info and Privacy policy.

Play Internet, DAB or FM radio

Internet - You can search for a radio station or podcast by location, genre or by the station name. You can also store preset stations or add a station to your favourites list.

DAB - Carefully, extend the telescopic aerial. A scan of the Band III DAB channels will be carried out. Rotate the Tuning control to access the full station list. Press the Tuning control to select the highlighted radio station.

FM - Extend the telescopic aerial. Rotate the Tuning control clockwise or anti-clockwise and then press the Tuning control to scan low to high or high to low frequency.

USB Player

Play your music collection from a USB memory device.
Choose 'USB playback' to playback a USB memory device.
The USB socket can also be used to charge your smartphone, tablet or similar devices.

Bluetooth

1. Ensure Bluetooth is enabled on your smart device.
2. Press Mode to select Bluetooth mode on your audio system.
3. The Bluetooth indicator will flash and your audio system will show that it is 'discoverable'. On your smart device select 'Stream 67L'. Once the connection is established the indicator will remain steady. You may now play your music.
4. To connect a different device, apply a long press on the Bluetooth Pair button on your audio system. Your audio system will become discoverable by other devices.

Media playback controls

Control media playback using the previous, next, play/pause or stop buttons.
Note: These features are dependent on the music being played and will not always be available.

Play CD / CD MP3 / WMA discs

Your audio system can playback standard CDs and CD-R/CD-RW discs with standard audio or compatible audio files. Use only full size standard CDs. Mini CDs (8cm diameter) are not compatible with the player and may jam the CD mechanism.

1. Press Mode to switch the unit to CD mode.
2. To eject or reload a CD give a long press on the CD Stop/Eject button.
3. Press the Play/Pause button to start playing the disc. Adjust the volume. To pause or resume playback press Play/Pause.
4. To stop playback press the CD Stop/Eject button.
5. While the CD is playing select skip tracks with the Previous and Next buttons.
6. When playing an MP3/WMA disc you can skip to another folder using the Up or Down buttons on the remote control. Pressing Menu will allow access to the browse file option.
7. Use the Repeat/Shuffle button to alter the playback order or repeat behaviour.

Preset radio stations

Your radio has 40 Internet radio, 10 DAB and 10 FM presets which can be set to store a radio station or (for Internet radio, a podcast).

1. Tune to the required radio station. Apply a long press on the Preset button 'Save to preset' will be displayed. Use the Tuning control to scroll to an unused preset or a preset you wish to change. Press Tuning to store.
2. To recall a preset station, choose Internet, DAB or FM mode. Give a short press on the Preset button 'Recall from preset' will be displayed. Use the Tuning control to select the desired preset station.

Remote control battery replacement

Please read the safety leaflet provided before using batteries.

1. Remove the battery cover on the rear of your remote control by pulling the small slot on the side of the remote body.
2. Insert 2 x AAA size batteries into the spaces in the compartment. Take care to ensure the batteries are inserted in the right direction as shown inside.
3. Replace the cover. If the remote is not to be used for an extended period of time it is recommended that the batteries are removed.

Replace batteries only with the same or equivalent type. Danger of explosion if the batteries are incorrectly replaced.

System reset

If you wish to completely reset your audio system to its initial state perform a factory reset. Press Menu. Choose 'System settings', 'Factory Reset' then 'YES'. All user entered settings will be erased.

In order to minimise its energy consumption when not in use, your audio system will go into standby if it detects that it is no longer being used. By default this period is set to 8 hours but you may change it if you wish. With your audio system switched on, press Menu, choose 'System settings' then 'Inactive Standby' and then choose from 2, 4, 6, 8 hours or Off. Your audio system will go into standby after the selected time has expired.

Specifications

Power requirements
Mains	100 - 240V 50/60Hz
Remote control batteries	2 x AAA size
USB output	5V / 1A
Connectivity
Wired Ethernet	10/100M bits/sec via RJ-45 connector
WiFi	802.11 b, g, n or a supported with WEP and WPA / WPA2 encryption

Compatible with 2.4 GHz and 5 GHz WiFi bands.
5 GHz Wi-Fi function: 5150-5350MHz, 5470-5725MHz and 5725-5875MHz

www.robertsradio.com

Videos

How to find the software version of your Internet Roberts Radio Video

Documents / Resources

References

• App Store - Apple
• Google Play
• Official Roberts Radio Online Shop | British Audio

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Roberts Stream 67L - Smart Audio System Manual