Operational Check For The Remote Control; Graphics Overlaying The Video; Table 3-1 Operational Check Procedures - Motorola DCH200 Installation Manual

3 INSTALLATION

Operational Check for the Remote Control

The operational check tests communication with the remote control:

Table 3-1 Operational check procedures

Feature
Power on
Channel selection
Volume control
If the DCH200 does not operate properly, refer to the

Graphics Overlaying the Video

The DCH200 can generate graphics that overlay the video programming or fill the
entire television screen. Common examples include on-screen menus (such as the
On-Screen Diagnostics) and EPG. The DCH200 overlays these graphics whenever
you open a menu or scroll through a program grid.
On-screen graphics are available for all DCH200 video outputs.
Testing Procedure
Press power on the remote control to turn on the DCH200.
Tune to the output channel (3 or 4).
Scan through the channels using the channel + or - keys.
Tune to several channels by entering the channel number using the
numeric keys.
Press volume + or - on the remote control to increase the volume to its
upper limit, lowest level, and to a comfortable level.
Press mute to turn the sound off. Press mute again to restore the
sound.
12
Troubleshooting section.