Chapter 2: Installing Your Interactive Whiteboard System; Choosing A Location Choosing A Height - SMART Board Board 600i6 Configuration And User's Manual

Chapter 2
Installing your interactive
whiteboard system
Choosing a location
Choosing a height
Securing your interactive whiteboard system
Locking the pen tray to your interactive whiteboard
Securing the projector to the boom
Routing the cables
Installing SMART software
Changing your projector's aspect ratio for use with your SMART Board 690 interactive
whiteboard
Consult the SMART Board 480i6 interactive whiteboard system installation document included
with your product for instructions on how to install and secure your system.
I M P O R T A N T
Use the SMART Board 660i5,680i5, 685i5 and 690i5 interactive whiteboard system installation
guide (smarttech.com/kb/154547) to install your interactive whiteboard, projector and ECP.
This chapter provides additional considerations and details for installing your interactive
whiteboard system.
Choosing a location
Choose a location for your interactive whiteboard system that's far from bright light sources, such
as windows and strong overhead lighting. Bright light sources can cause distracting shadows on
your interactive whiteboard and can reduce the contrast of the projected image.
Select a wall with a flat, regular surface and sufficient clearance to accommodate your interactive
whiteboard system. Install the projector and your interactive whiteboard on the same flat surface.
For best presentation alignment, mount your interactive whiteboard system in a location that's
central to your audience's viewing direction.
For mobile or adjustable installation options, contact your authorised SMART reseller.
7
7
8
8
8
8
8
9
9