Aeros Discus 12 Owner's Manual page 25

6. Put two velcro ties under the glider bag with the sail.
Carefully pack up the frame on top of the glider bag with the sail.
Put down the front leading edges / keel / front crossbar assembly
first.
Slide the front crossbar forward to align its rear part with the rear
part of the front leading edges.
Bring forward the rear keel / middle keel assembly and put it
beside.
Put the rest of the frame parts on top, using pieces of soft foam
as pads in places that stick out, in order to protect the frame parts
from damage ( ).
Photo 46
7. Fold the glider bag with the sail. Before doing so put some
pads to avoid the sail damage from contact with the end surface of
the frame ( ).
Photo 47
8. Tie up the glider package with remaining velcro ties ( ).
Photo 48
24
Photo 46
Photo 47
Photo 48