Discus Stability Systems - Aeros Discus 12 Owner's Manual

14. Install the glider bag. Flip the glider over onto the ground.
Detach the basebar. Put the battens and the tip wands in the batten
bag and stow it in the rear of the glider between the leading edges,
same as basebar (
Photo 31
15. Fold up the control bar and install the control bar bag, lay it
down against the keel. Undo the velcro, which was done first, reach
it out to free the keel tube and install it again around both leading
edges with the control bar inside (
16. Zip up the glider bag.

DISCUS STABILITY SYSTEMS

Several design features of the Discus determine the glider's degree of stability in pitch:
- The combination of wing sweep and spanwise twist.
- Reflex in the root section.
- Reflex support bridles.
- Outboard sprogs, and the height at which they and the transverse battens support the trailing edge.
The shape of the preformed battens and the internal fabric ribs, and adjustment of the internal velcro attachments,
-
which define the airfoil.
- The setting of the tip wands.
Correct attachment and proper adjustment of the outboard sprogs are critical to providing adequate stability at low angles
of attack, particularly those below the normal operating range.
).
).
Photo 31
14
Photo 31