Control menu
Menu
Item
,,
30
Options
Notes (Default settings in bold print)
–
(16-bit basic)
DMX address (new fixtures are supplied with address set to 1)
–
(16-bit extended)
16-bit basic DMX mode with 2-channel (coarse and fine) control of
pan and tilt
16-bit extended DMX mode with basic mode features plus fine
control of electronic and mechanical dimmers, cyan, magenta,
yellow and zoom
Normal pan and tilt control
Map DMX pan control to tilt channel and vice versa
Normal pan control: left
Reverse DMX pan control: right
Normal tilt control: up
Reverse DMX tilt control, down
Normal pan/tilt speed
Optimize pan/tilt movement for speed
Normal effects speed
Optimize effects movement for speed
Pan/tilt speed slave: effects speed copies the pan/tilt speed set
via the control menu or via DMX
Display remains on
Display goes into sleep mode 2 minutes after last key press
Display goes into sleep mode 10 minutes after last key press
Display adjusts automatically for ambient light level
Adjust display intensity manually
–
Enable reset via DMX
Disable reset via DMX
Enable reset via DMX when reset command is held for 5 seconds
CMY filters move shortest distance (across open)
CMY filters do not cross open
Linear dimming curve (VRMS: voltage root mean square)
Square law dimming curve
Inverse square law dimming curve
Normal mode: pan, tilt and effects set to normal speed, fans
obey control menu (
Studio mode: pan, tilt and effects set to normal speed, fans set to
temperature-regulated (overrides other control menu settings)
'Silent' mode: pan, tilt and effects set to slow speed, fans set to off
(overrides other control menu settings)
/
-
/
default)
-
Return all settings (except calibrations) to factory defaults
Load custom configuration
Save current custom configuration
Table 3: Control menu
MAC TW1 user manual
right
down
up
Enable lamp pre-heat (OFF by default)
0.0 - 20.0% lamp preheat value (1.0% by default)
Enable economy mode: reduced lamp power (OFF by
70 - 100% lamp power value (80% by default)
left
) setting