Electrical Specifications - Fujitsu SPARC M4000 Product Notes

Documentation Updates (Continued)
TABLE 2
Title
SPARC Enterprise
M4000/M5000 Servers
Service Manual
SPARC Enterprise
M4000/M5000 Servers
Service Manual
SPARC Enterprise
M4000/M5000 Servers
Service Manual

Electrical Specifications

The following changes belong in the SPARC Enterprise M4000/M5000 Servers
Service Manual.
Power Supply Features
TABLE 3
Power draw (maximum)
Volt Ampere
Heat
Page Number Update
9-1 CHAPTER 9, "XSCF Unit Replacement"
15-1 CHAPTER 15, "Operator Panel Replacement"
The following important message will be added.
Note – If you replace the XSCF unit and the operator
panel simultaneously, system will not operate
normally. Execute the showhardconf command or the
showstatus command to confirm that the component
replaced earlier is operating normally, before replacing
the subsequent FRU.
11-7 11.2, "DIMM Replacement"
See "DIMM Replacement" on page 14
C-7 TABLE C-5 "Power Supply Feature"
See "Electrical Specifications" on page 11
SPARC Enterprise M4000
2016W
2058 VA
6879 BTUs/hr (7258 kJ/hr)
SPARC Enterprise M5000
3738W
3815 VA
12754 BTUs/hr (13457 kJ/hr)
SPARC Enterprise M4000/M5000 Servers Product Notes
for the changes.
for the changes.
11