Preparing Power Supply Equipment; Electrical Specifications - Fujitsu SPARC Enterprise M3000 Installation Manual

Recommended Values for the Temperature and Humidity in the Computer Room
TABLE 2-2
Near outlet of underfloor air-conditioning
Air-conditioning
˚C
system
Direct air supply ------
or
duct air supply
18 1
Underfloor air
supply
Direct air supply 18 1
or
combination of
duct air supply
and underfloor
air supply
2.2.2

Preparing Power Supply Equipment

This section describes the electrical specifications, facility power requirements, and
grounding for the SPARC Enterprise M3000 server.
To prevent catastrophic failures, the facility power design must ensure that sufficient
redundant power is provided to the system. Electrical work and installation must
comply with the applicable local, state, or national electrical codes.
2.2.2.1

Electrical Specifications

TABLE 2-2
The values in the following table are the maximum power values for the server in its
maximum configuration. The actual values vary depending on the system
configuration.
2-4 SPARC Enterprise M3000 Server Installation Guide • January 2009
Temperature
Humidity
˚F
------ ------
64 2 65 5
64 2 65 5
lists the SPARC Enterprise M3000 server electrical specifications.
At sensor control point in room
Temperature
˚C
(%)
24 2 75 4
Target of Target of
24˚C 75˚F
24 1 75 4F
Humidity
˚F
(%)
45 5%
The room
About temperature
45% at and
24˚C humidity
(75˚F) vary
depending
on the
thermal load
in the room.
45 5
Remarks
------
------