Table of Contents
Advertisement
Object
Description
Indicate port 1 to port 26.
Port
Enable
Per port Disable or Enable on Web Smart Switch.
Per port Disable (Off) or enable (On) Auto negotiation on Web Smart Switch.
Auto
Spd/Dpx
Adjust per port speed duplex mode on Web Smart Switch; the available options are Auto, 100F,
100H, 10F, 10H. Default mode is Auto.
Flow Control Per port Flow control Disable (Off) or enable (On) on Web Smart Switch. Default mode is On.
Input the value of packet rate sent from the connected port to this port must enable the flow control
InRate*
feature of this port for the function to work normally. The available value ranges from 1 to 99 and rate
unit: 1Mbps.
OutRate*
Input the value of packet rate sent from this port to the connected port. The available value ranges
from 1 to 99 and rate unit: 1Mbps.
Apply button Press this button for save current configuration of each port on Web Smart Switch.
InRate/OutRate setting are only for Fast Ethernet Port.
Remark:
Figure 4-5 Port Configuration Web Page screen
Table 4-2 Descriptions of the Port Configuration screen Objects
- 17 -
Advertisement
Table of Contents
