Step 3: Secure the brackets tightly.
Step 4: Follow the same steps to attach the second bracket to the opposite side.
Step 5: After the brackets are att
the rack, as shown in
Step 6: Proceed with the steps 4 and steps 5 of section 2.3.1 Desktop Installation to connect the network cabling and
supply power to your Web Smart Switch.
2.3.3 Installing the SFP transceiver
T
he sections describe how to insert an SFP transceiver into an SFP slot.
The SFP transceivers are hot-plug e and hot-swappable. You can plug-in and out the transceiver to/from any SFP port
without having to power down the Switch. As th
Approved PLANET SFP Transceivers
PLANET Web Smart switches support both single mode and mu
P
LANET SFP transceivers is correct at the time of publication:
■MGB-SX SFP (1000BASE-SX SFP t
■MGB-LX SFP (1000BASE-LX SFP transceiver )
MFB-FX SFP (100Base-FX SFP transceiver - 2Km)
■
MFB-F20 SFP (100Base-FX SFP transceiver -20Km)
■
ached to the Web Smart Switch, use suitable screws to securely attach the brackets to
Figure
2-7.
Figure 2-7 Mounting the Web Smart Switch in a Rack
e Figure 2-8 appears.
Figure 2-8 Plug-in the SFP transceiver
ransceiver )
lti mode SFP transceiver. T
he following list of approved
- 11 -