Table of Contents
Advertisement
4.19
CHECK BLADE AND MACHINE ROTATION DIRECTION.
Never operate a blade in the wrong rotation direction. Check the machine rotation direction and
blade direction when mounting a blade.
4.20
CHECK BLADE MAXIMUM ALLOWABLE SPEED.
Check the maximum operating speed of the machine and blade. Never use a blade rated less than
the machine's maximum speed rating.
4.21
CHECK BLADE FOR CRACKS, DAMAGE, AND MISALIGNMENT.
Never use a cracked, damaged, or misaligned blade. After mounting blade, rotate by hand to check for
proper alignment.
4.22
CHECK DIAMOND BLADE FOR WARNINGS.
Many diamond blades contain a chemical known to the state of California to cause cancer and/or
birth defects or other reproductive harm.
4.23
DO NOT FORCE WRONG SIZE OR TYPE BLADE ONTO MACHINE.
Do not force a blade onto the machine shaft or alter the size of the arbor-mounting hole. Be certain
that the drive pin is in place through the blade when tightening the blade nut. Never add a drive pin
hole or modify a blade.
4.24
USE CORRECT SAW AND ACCESORIES.
Do not force a small saw to do the job of a heavy-duty saw. Do not use the saw for improper
applications. Never cut material for which the blade was not designed. Check blade manufacturer's
guidelines on material to be cut.
4.25
STORE IDLE EQUIPMENT.
The machine, blades and tools should be stored in a dry and secure location when not in use. Keep
equipment out of reach of children.
4.26
DO NOT FORCE SAW.
The saw will do the job better and safer at the rate for which it was designed.
4.27
OBTAIN MATERIAL SAFETY DATA SHEET (MSDS) FOR ALL WORK SURFACE MATERIALS.
This includes primers, all coatings, adhesives, tile and crack filling materials, etc. Do not attempt to
cut, clean out or remove material without MSDS information. Consult MSDS sheet for hazards
information. Be aware that some materials are explosive as a dust.
4.28
DO NOT OVERREACH.
Keep proper footing and balance at all times.
4.29
MAINTAIN MACHINE WITH CARE.
Keep machine clean and follow maintenance procedures for better and safer performance. Keep
handles dry, clean, and free from oil and grease. Follow instructions for lubricating and changing
accessories.
4.30
REMOVE AJUSTING TOOLS.
Form a habit of checking to see that tools such as adjusting wrenches are removed from the
machine and properly stored before starting the engine.
4.31
STAY ALERT.
Watch what you are doing. Use common sense. Do not operate machine when you are tired or
fatigued.
4.32
DO NOT USE DRUGS, ALCOHOL, MEDICATION.
Do not operate machine while under the influence of drugs, alcohol, or any medication.
4.33
KEEP THE RIGHT PARTS IN THE RIGHT POSITIONS.
Do not operate machine with parts missing or improperly mounted.
Advertisement
Table of Contents
