Warranty And Service - EINHELL JS SERIES Operation And Maintenance Manual

8.4.2 These bearings are exposed to excessive dust and require the same brand of high quality grease
as supplied by the factory. Apply ALVANIA® Grease 3 with a hand grease gun to both flanged
bearings on the blade shaft after every 100 hours of use.
8.4.3 The performance of the bearing is greatly influenced by the quantity of grease. For optimum
performance, insert grease until a little bleeds out from between the outer ring raceway and the
perimeter of the slinger. Wipe off excess grease.
8.4.4 Slowly tilt the JS forward until all wheels are back on the work surface.
8.5 Honda engine maintenance
8.5.1 See the section titled "Servicing your Honda engine" in the Honda Engines Owner's Manual. This
section includes detailed information on:
8.5.1.1 The importance of maintenance
8.5.1.2 Maintenance safety and precautions
8.5.1.3 Maintenance schedule
8.5.1.4 Refueling
8.5.1.5 Engine oil level check, oil change, and recommendations
8.5.1.6 Air filter inspection
8.5.1.7 Air cleaner service
8.5.1.8 Sediment cup cleaning
8.5.1.9 Spark plug service
8.5.1.10 Idle speed adjustment
8.6 Transportation
8.6.1 Allow the JS blade guard, blade, engine, and engine muffler to cool.
8.6.2 See the section titled "Helpful tips and suggestions - Transporting" in the Honda Engines Owner's
Manual.
8.6.3 With engine in the OFF position, securely strap down JS to shipping pallet, trailer bed, etc. in
normal upright position.
8.7 Trouble shooting
8.7.1 See the three sections titled "Helpful tips and suggestions, Taking care of unexpected problems,
and Technical and consumer information" in the Honda Engines Owner's Manual.
8.7.2 See Rx for Diamond Blade Safety by the Masonry and Concrete Saw Manufacturers Institute for
diamond blade troubleshooting.
9.1 Warranty
This document is to be used as a guide in determining warranty policies and procedures for US
SAWS (US SAWS) and its U.S. SAWS® products. It is to be used in determining whether a warranty
is justified and as a procedural guide in completing a US SAWS warranty claim form.
9.0

Warranty and service

33