How To Reset; Owner And Warranty Information - tweak mini Instruction Manual

How to Reset

After wearing Tweak Mini for a while, you may decide you want to try a
different Amplifi cation Setting than the one you initially selected.
Tweak Mini may be reset by following these simple steps:
With a battery inserted, open the battery door.
1
Press and hold the top or bottom part of the rocker switch.
2
While still pressing and holding the rocker switch, close the
3
battery door.
Continue pressing the rocker switch for at least 25 seconds, then
4
release the rocker switch.
Open the battery door.
5
When you close the battery door again, Tweak Mini is reset.
6
You may now proceed to select a new Amplifi cation Setting.
See page 11 for instructions.
22 How to Reset
Owner information
each Tweak Mini has a serial number located on the underside
of the amplifi er. Please record this serial number in the owner information
section below.
LeFT
Serial Number
Color
Amplifi cation Setting
Owner Name: _________________________________________________
Tweak Mini Purchase Date: _______________________________________
Place of purchase: _______________________________________________
Warranty
See warranty card for more information.
RIgHT

Owner and Warranty Information

23