Care - tweak mini Instruction Manual

Care

The following instructions will assist in extending the life of your Tweak Mini
amplifi er.
Cleaning the Exterior
You should inspect and clean your Tweak Mini every day. To clean, gently
wipe the surface with a soft, dry cloth or a moist non-alcohol disinfecting
wipe. Do not allow water or liquid to enter any openings.
The most common causes of amplifi er problems are moisture and wax.
The daily use of a Dry & Store
moisture and wax buildup. Dry & Store products may be purchased at
www.TweakHearing.com or www.DryandStore.com
Cleaning the Tube and Tip
Wipe the exterior of the tube and tip every day. A
thorough cleaning of the tube and tip is recommended
every few days to prevent wax buildup.
Use the cleaning line provided to clean the inside of
the tube and tip, by pushing the cleaning line through
the tube.
(FIgURe 9)
14 Care
appliance is recommended to reduce
®
FIGURE 9
First, remove the tube from the case by
twisting the tube connector at least 45°
then pulling it off.
Insert the line at the connector end where
the tube attaches to the amplifi er case
and push out through the tip.
Re-attach the tube by aligning the
tube connector end with the end of the
amplifi er case, then push the connector
straight onto the sound post until it snaps into place. There is no need to
rotate the tube when re-attaching.
Do not rinse or submerge these parts in water. There is a risk of damage
if a water drop becomes trapped in the tube. If this should occur, it will
prevent sound from coming through the tube and may be harmful to
Tweak Mini's electronics.
CLEANING LINE
(FIgURe 10)
FIGURE 10
Care 15