How To Reset; Warranty And Owner Information - tweak Basic Instruction Manual

How to Reset

After wearing Tweak for a while, you may decide you want to try a
different Amplification Setting than the one you initially selected.
Tweak may be reset by following these simple steps:
With a battery inserted, open the battery door.
1
Press and hold the upper or lower portion of the rocker switch.
2
While still pressing and holding the rocker switch, close the
3
battery door.
Wait at least 15 seconds, then release the rocker switch.
4
Open the battery door.
5
When you close the battery door again, Tweak is reset.
6
You may now proceed to select a new Amplification Setting.
See page 12 for Basic model or page 14 for Focus model.
26 How to Reset
(both models)
Warranty
See warranty card for more information.
Owner information
Each Tweak has a serial number (S/N) located on the underside of the amplifier.
Please record this serial number in the owner information section below.
Basic / Focus
(circle one)
Serial Number
Color
Amplification Setting Selected
Owner Name: __________________________________________________
Tweak Purchase Date: ___________________________
Place of purchase:
Business Name: _________________________________________________
City: ________________________
Phone Number: _________________________________
LEFT RIGHT
St: _________ Country: ___________

Warranty and Owner Information

27