Wearing Tweak Mini; Set-Up - tweak mini Instruction Manual

Wearing Tweak Mini

Place the Tweak Mini over your ear. grab the loose end of the tubing
and gently insert the tip into the ear canal. Position the retaining lock in the
bowl of the ear. It may be helpful to gently pull the top of the ear
(FIgURe 6)
back and up, to open the ear canal when inserting the tip.
When properly positioned, the tubing will lay close to the head around
the front of the ear and into the canal. You can check this by moving your
fi nger down the tubing, into the ear. Using
a mirror at fi rst may be helpful to properly
position Tweak Mini.
Now it's time to set up your Tweak Mini.
The fi rst step is to choose your preferred
amplifi cation setting. It's what makes Tweak
so unique, and it's easy to do.
(If the tip doesn't stay in your ear, you
may need a different length tube. Additional
sizes of tips and tubes are available at
www.TweakHearing.com or by calling
1-888-815-3240.
10 Wearing Tweak Mini
Insert tip
in your
ear canal.
RETAINING
LOCK
FIGURE 6
Tweak Mini
Select Your Amplifi cation Setting
With a fresh battery inserted and Tweak Mini properly placed in your ear,
you are now ready to choose your preferred amplifi cation setting.
Start out in a quiet environment. The fi rst time you turn on Tweak Mini, it will
be at the lowest amplifi cation setting. How does it sound?
To try the next level of amplifi cation, press and release the top part of the
rocker switch . You will hear two beeps, indicating you are now at
(FIgURe 7)
Amplifi cation Setting Two.
What you are doing is
Amplifi cation
Setting
sampling the available
ONe
acoustic settings. There
TWO
are four different settings
THRee
for you to try.
FOUR
You can press either the upper or lower portion
of the rocker switch to try out the different
amplifi cation settings. Take as long as you want
to try the different settings.

SET-UP

Number of
Beeps
UPPER
ROCKER
PORTION
1 beep
SWITCH
2 beeps
3 beeps
4 beeps
LOWER
PORTION
FIGURE 7
Tweak Mini Set-Up 11