Sprecode Key - Aastra 9480i User Manual

Line Keys and Softkeys

Sprecode Key

You can set a key to automatically activate specific services offered by the server by setting a key to "sprecode". For
example, if the sprecode value of *82 is configured, then by pressing the key, *82 automatically activates a service pro-
vided by the server. The value you enter for this field is dependent on the services provided by the server. Contact your
System Administrator for information about available services.
Setting a Sprecode Key
Aastra Web UI
Use the following procedure to configure a sprecode softkey on the 9480i phone.
1. Click Operation->Softkeys and XML.
Softkeys
2. Select from "Key 1" through "Key 20".
3. In the "Type" field, select Sprecode.
4. In the "Label" field, enter a label to display on the IP phone for this softkey.
5.
In the "Value" field, enter the appropriate value for accessing specific services from the server.
Note:
For values to enter in this field, contact your System Administrator.
6. Check (enable) or uncheck (disable) the "Connected" state to apply to this softkey.
7. Click Save Settings.
74
41-001382-05 REV03 – 07.2014