Shutting Down - Panasonic CF-U1 series Operating Instructions Manual

n Shutting down
Windows does not
shut down.
n Display
No display.
The screen is dark.
The LCD brightness
changes a number
of times when the
AC adaptor is dis-
connected.
l Remove the USB device.
l Wait one or two minutes. It is not a malfunction.
l The external display is selected. Press
to switch the display. Wait until the display has been
switched completely before pressing
again.
l When using an external display,
Ÿ Check the cable connection.
Ÿ Turn on the display.
Ÿ Check the settings of external display.
l The display is turned off by the power-saving function.
To resume, do not press the direct selection keys, but
press any other key like
l The computer entered (
(
saving function. To resume, press the power switch.
l The screen may not be displayed even after the com-
puter resumed from standby or hibernation. In this
case, press
the computer again.
l The screen is darker when the AC adaptor is not con-
nected. Press
As you increase the brightness, battery consumption
increases.
You can separately set the brightness for when the AC
adaptor is connected and when not connected.
l Intel(R) Display Power Saving Technology is active and
automatically changes the LCD brightness. This is not
a malfunction.
.
) standby or hibernation by the power-
+ ( ) to enter standby and resume
+ ( ) and adjust the brightness.
+ ( )
+ ( )
) sleep /
41