NOTE
l PC Information Viewer
This computer periodically records the management information of the flash
memory, etc. The maximum data volume for each record is 2048 bytes. This
information is only used for estimating the cause when the flash memory goes
down by any possibility. They are never sent to outside via network nor used
for any other purpose except for the purpose described the above.
To disable the function, add the check mark for [Disable the automatic save
function for management information history] in [Hard Disk Status] of PC Infor-
mation Viewer, and click [OK].
(è
Reference Manual "Checking the Computer's Usage Status")
n Precaution against Starting Up/Shutting Down
l Do not do the following
Connecting or disconnecting the AC adaptor
Pressing the power switch
Touching the keyboard, touchscreen or external mouse
Turn on/off the wireless switch
n To change the partition structure
You can shrink a part of an existing partition to create unallocated disk space,
from which you can create a new partition. In the default setting, you can use a
single partition.
A Click
(Start) and right-click [Computer], then click [Manage].
l A standard user needs to enter an administrator password.
B Click [Disk Management].
C Right-click the partition for Windows ("c" drive in the default setting), and
click [Shrink Volume].
l The partition size depends on the computer specifications.
D Input the size in [Enter the amount of space to shrink in MB] and click
[Shrink].
l You cannot input a larger number than the displayed size.
l To select [Reinstall to the first 2 partitions.] in reinstalling Windows 7
(è page 35), 30000 MB or more is necessary for [Total size after shrink
in MB].
E Right-click [Unallocated] (the shrunk space in the step D) and click [New
Simple Volume].
F Follow the on-screen instructions to make the settings, and click [Finish].
Wait until formatting is completed.
29