Panasonic CF-U1 series Operating Instructions Manual page 43

n Display
<Only for model
with GPS>
The cursor cannot
be controlled prop-
erly.
The cursor can not
be displayed at the
right position.
n Touchscreen
The cursor does not
work.
Cannot input using
the touchscreen.
l Operate the following steps.
A Set [GPS] to [Disabled] in the [Advanced - Serial
Port Configuration] of the Setup Utility.
B Press +
tion message, and press
The computer will restart.
C Log on to Windows as an administrator.
D Click (Start) and input "c:\util\drivers\gps\GPS.reg"
in [Search programs and files], and press
E Click [Yes], click [Yes] and click [OK].
Then Restart the Computer.
F Press
+
displayed.
G Set [GPS] to [Enabled] in the [Advanced - Serial
Port Configuration].
H Press +
tion message, and press
l When using application software displaying a unique
cursor (i.e. Paint), note the following restrictions.
Ÿ The cursor unique for the application software is not
enlarged.
Ÿ The cursor unique for the application software may
not be displayed at the right position. Confirm the op-
eration position using the Windows cursor (enlarged
cursor when zoomed).
l When using the external mouse, connect it correctly.
l Restart the computer using the keyboard.
Press (Windows) and press
to select [Restart] and press
Press (Windows),
l If the computer does not respond to keyboard com-
mands, read "No response." (è page 45).
l Set [Touchscreen Mode] to [Auto] or [Tablet] in the
[Main] menu of the Setup Utility.
(F10) and select [Yes] at the confirma-
(Enter).
(F2) while [Panasonic] boot screen is
(F10) and select [Yes] at the confirma-
(Enter).
two times, and press
and to select [Restart].
(Enter).
(Enter).
43