Panasonic CF-U1 series Operating Instructions Manual page 39

n Starting Up
The date and time
are incorrect.
[Executing Battery
Recalibration]
screen appears.
[Enter Password]
does not appear
when resuming from
( )
sleep /
( )
standby or hiberna-
tion.
l Make the correct settings.
Click (Start) - [Control Panel] - [Clock, Language,
and Region] - [Date and Time].
Click [start] - [Control Panel] - [Date, Time, Language,
and Regional Options] - [Date and Time].
l If the problem persists, the internal clock battery may
need to be replaced. Contact Panasonic Technical
Support (è page 56).
l When the computer is connected to LAN, check the
date and time of the server.
l The 2100 A.D. or later year will not be correctly recog-
nized on this computer.
l The Battery Recalibration was canceled before Win-
dows was shut down last time. To start up Windows,
turn off the computer by the power switch, and then
turn on.
l The password you have set in the Setup Utility is not
requested at resuming. To use the password security at
resuming, set the Windows password.
A Click (Start) - [Control Panel] - [User Accounts
and Family Safety] - [Add or remove user accounts]
and select the account, and set the password.
B Click (Start) - [Control Panel] - [System and
Security] - [Power Option] - [Require a password
when the computer wakes] and add a check mark
for [Require a password].
l Set the Windows password. The password you have
set in the Setup Utility is not requested at resuming.
A Click [start] - [Control Panel] - [User Accounts] and
select the account, and set the password.
B Click [start] - [Control Panel] - [Performance and
Maintenance] - [Power Options] - [Advanced] and
add a check mark for [Prompt for password when
computer resumes from standby].
39