Pace Technologies MEGA-T300 Instruction Manual page 44

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ▲
3601 E. 34th St. Tucson, AZ 85713 USA Tel. +1 520-882-6598 Fax +1 520-882-6599 email: pace@metallographic.com
Part no.
MG-H
MG-TB
MG-VW
MEG-TS
QCR-1100
QCL-1100
MG-0159
Please read this instruction manual carefully and follow all installation, operating and safety guidelines.
MEGA-T300 Abrasive Cutter
Description
Vice Components
65 mm (2.6-inch) height adapter for either MIG-
01 or MG15-01 vertical clamping vises
Vertical clamping vise t-slot bolt and nut
Vertical clamping vise adjustment t-wrench
T-slot nuts (2/set)
Right quick clamping vise for MEGA-T300
abrasive cutter
Left quick clamping vise for MEGA-T300
abrasive cutter
Mechanical stop for cutting repetitive
samples
I M
NSTRUCTION ANUAL
Web: http://www.metallographic.com
Images
40