Pace Technologies MEGA-T300 Instruction Manual page 12

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ▲
3601 E. 34th St. Tucson, AZ 85713 USA Tel. +1 520-882-6598 Fax +1 520-882-6599 email: pace@metallographic.com
Recirculating tank connections
Pump
Tank
drain
External coolant supply:
Drain:
Electrical connections:
Electrical connection for
external coolant supply:
Please read this instruction manual carefully and follow all installation, operating and safety guidelines.
MEGA-T300 Abrasive Cutter
Attach 3/4-inch tube between pump and cutter.
1.5-inch (38 mm) tube.
Connect six-foot electrical power cable to source.
Note: Inspect the operating voltage on the name plate.
Power for recirculation system comes from the MEGA-T300,
(Installation continued on next page)
I M
NSTRUCTION ANUAL
Web: http://www.metallographic.com
Drain into
screen
8