Pace Technologies MEGA-T300 Instruction Manual page 14

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ▲
3601 E. 34th St. Tucson, AZ 85713 USA Tel. +1 520-882-6598 Fax +1 520-882-6599 email: pace@metallographic.com
Recirculation tank
The MEGA-T300 is equipped with a mobile
three-chamber counter-current coolant tank.
The first chamber contains a coarse strainer
for removing larger debris.
Replacement of the coolant is accomplished
by rolling out the tank and removing the
water pump.
Note: Dispose of the old coolant in
accordance with federal, state and
local regulations.
Three Chamber tank
with counter-current
flow
Rinse line
After cutting, it is recommended that the cutting
chamber be rinsed to prevent debris and
corrosion build-up.
Please read this instruction manual carefully and follow all installation, operating and safety guidelines.
MEGA-T300 Abrasive Cutter
Coarse
strainer
Water flow
regulating valve
I
NSTRUCTION
Web: http://www.metallographic.com
Pressure
Drain
line
line
Tank
drain
M
ANUAL
Water
pump
Electrical
connection
10