Setup; Entertainment Networking - Life Fitness 93X Operation Manual

1.2 S
ETUP
Read the Operation Manual before setting up the Total Body Trainer.
W P
HERE TO LACE THE
Following all safety instructions in Section 1.1, move the Cross-trainer to the location in which it
will be used. See Section 7, titled Specifications, for the dimensions of the footprint. Allow one
foot of clearance in front of the Cross-trainer to allow for movement of the pedal levers. It should
be easy to mount the Cross-trainer from the side.
H S
OW TO TABILIZE THE
After placing the Total Body Trainer in position, check the unit's stability by attempting to rock it.
Any slight rocking indicates that the unit must be leveled. Check the front stabilizing feet to
determine which foot does not rest fully on the floor. Rotate the foot counter-clockwise to lower
it. Recheck the stability and adjust again as needed until the Total Body Trainer is stable and no
longer rocks. Lock the adjustment into position by tightening the jam nut against the sta-
bilizer bar with an open end 17mm wrench.
C P
HECK FOR
The Total Body Trainer console is powered by a rechargeable 6-volt battery. Check the battery
by pressing the START key. The console should light up, and the MESSAGE CENTER should
display a prompt to set up a workout. If this does not occur, mount the Total Body Trainer and
begin pedaling. The console should then light up, making it possible to program a workout.
Pedal for 10 to 20 minutes at 1.5 mph (2.4 km/h) or faster during a workout to charge the bat-
tery. Afterwards, the pedal action during workouts keeps the battery charged. If the console still
does not light, contact Life Fitness Customer Service. See section 6.5, titled How to Obtain
Product Service, for more information.
F E
ITNESS AND
The Total Body Trainer may be connected via CSAFE protocol to a fitness entertainment system
and/or a fitness network, such as the FitLinxx
Customer Support Services to purchase networking kits. See section 6.5, titled How to Obtain
Product Service, for more information.
• Fitness network: The network connection enables the console to upload user workout
statistics to a fitness network database or to download remotely stored information, such
a pre-set workout program. See Section 4.2, titled Using the Workouts, for information
on logging onto a network.
• Entertainment: The network connection enables the console to power a third-party
receiver for use with a service such as the Cardio Theater
BroadcastVision
T B
OTAL
T B
OTAL
.
OWER
N
NTERTAINMENT
TM entertainment system.
T
ODY RAINER
T
ODY RAINER
ETWORKING
TM interactive fitness network. Contact Life Fitness
® entertainment system or the
7