Using Additional Bases; Registering Your Bt Freelance Xa 5000; Handset To Another Base - BT FREELANCE XA 5000 User Manual

Using additional bases

Your BT Freelance XA 5000 handset can be registered to
up to 4 other bases.
Registering your BT Freelance XA 5000 handset to
another base
On the base:
1. Press and hold to put the base into registration mode.
The base beeps and the In use light flashes while the
handset is being registered.
On the handset:
2. Press , scroll
to REG BASE and press
3. Scroll
BASE 1 2 3 4 will be displayed. The base that you are
currently registered to will flash.
4. Enter the number of the base you want to register to.
SEARCH1 is displayed (where 1 is the base number you are
searching for).
When the base is located, you will hear a confirmation
tone and PIN? will be displayed.
5. Enter the base PIN code and press
You will hear a tone to confirm you have entered the
correct code and the handset returns to idle mode.
If you experience any problems, please call the Helpline on 0870 605 8047
BT Freelance XA 5000 – Edition 1.1 – 17.10.05 – 7113
to REGISTER and press
.
.
IMPORTANT
You can only register your BT
Freelance XA 5000 handset to
another base if it is GAP
compatible.
You will not be able to register
your BT Freelance XA 5000
handset to a BT Studio or BT
Studio 500 base as these products
are not GAP compatible.
.
The default PIN code is 0000.
49