Setting Up Your Charger - BT FREELANCE XA 5000 User Manual

B BT Freelance XA 5000 multiple pack owners only
For each additional handset:
1. Position your BT Freelance XA 5000 charger close enough
to a mains power socket so that the cable will reach.
Plug the power adaptor cable into the underside of
the charger.
2. Plug the power adaptor into the mains wall socket and
switch the power on.
3. Install the 2 x AAA rechargeable batteries supplied into
the handset.
4. Place the handset in the charger and charge the handset
for at least 24 hours. The red
charger lights up.
Once the handset registers with the base, the
stops flashing.
Your BT Freelance XA 5000 is ready for use.
If you experience any problems, please call the Helpline on 0870 605 8047
BT Freelance XA 5000 – Edition 1.1 – 17.10.05 – 7113
Charging indicator on the
Handset numbers
Once registered with the base,
each handset will display its
handset number: 1, 2,
respectively.
Power
adaptor
cable
icon
Getting started
3 and 4
9