Selecting A Base To Use - BT FREELANCE XA 5000 User Manual

50 Using additional bases
If registration is unsuccessful, after
1 minute, the handset will display
the list of registered bases and you
can try again or select another
base to use.
If you are in an environment
where there is a lot of electrical
interference you may experience
difficulty registering to a base.
If AUTO is selected the handset
will automatically link to another
base with a strong signal, if the
signal it is currently receiving from
its present base becomes very
poor.
If you experience any problems, please call the Helpline on 0870 605 8047
BT Freelance XA 5000 – Edition 1.1 – 17.10.05 – 7113
Once registered you will hear a confirmation tone and
the next available handset number is allocated and
shown in the display.

Selecting a base to use

If your handset has been registered to more than one
base you can select which one it uses.
1. Press
3. Scroll
4. All bases that your handset is registered to will be
displayed, e.g. BASE 1 2 3 4
The base that you are currently registered to will flash.
5. Enter the number of the base you want to use.
Or
Press
When the handset locates the selected base you will hear
a confirmation tone.
to REGISTER and press
, scroll
to SELECT BASE and press
to select AUTO .
or
.
.