Select And Play Outgoing Message - BT FREELANCE XA 5000 User Manual

36 Using the answering machine
Personalise your OGM
To record your own outgoing
message, see 'Record your own
outgoing message', see page 37.
The answering machine is pre-set
to Answer and Record mode.
If you only want to hear the
current message just press the
button.
If you experience any problems, please call the Helpline on 0870 605 8047
BT Freelance XA 5000 – Edition 1.1 – 17.10.05 – 7113
Outgoing messages
The outgoing message (OGM) is the greeting a caller
hears when the answering machine picks up their call.
Your BT Freelance XA 5000 gives you a choice of two
pre-recorded outgoing messages, one for Answer and
Record and one for Answer Only.
Answer and Record
Callers hear the announcement and are able to leave a
message for you. The pre-recorded message is "Hello,
your call cannot be taken at the moment, so please leave
your message after the tone."
Answer only
Callers hear an announcement but cannot leave a message.
The pre-recorded message is "Hello, your call cannot be
taken at the moment, and you cannot leave a message, so
please call later."

Select and play outgoing message

1. Press and hold
message."
2. For Answer and
press
until you hear "Please select outgoing
Record, press
. The selected message is played.
or for Answer Only