Using Additional Handsets; Registering A New Gap Compatible; Handset - BT FREELANCE XA 5000 User Manual

Using additional handsets

46
IMPORTANT
You must choose a handset that is
GAP compatible to use with your
BT Freelance XA 5000.
If the handset does not locate the
base, the handset will return to the
previous menu. Try to register
again by using a different available
base number. Ensure that you are
in close vicinity of the base.
If you experience any problems, please call the Helpline on 0870 605 8047
BT Freelance XA 5000 – Edition 1.1 – 17.10.05 – 7113
If you purchase a new handset to use with your
BT Freelance XA 5000 it will have to be registered to the
base. You will need to do this before you can use it.
If you have purchased a BT Freelance XA 5000 multiple
pack each additional handset will come pre-registered to
the base.
With additional handsets, you can make internal calls,
page handsets and transfer external calls between your
handsets.
Registering a new GAP compatible handset to your
BT Freelance XA 5000 base
At the new handset:
1. Follow the new handset's user guide to set the handset
in registration mode.
At the BT Freelance XA 5000 base:
1. Press and hold the base
seconds, until you hear the validation tone (two beeps),
then release the button.
button for at least 10