General Precautions; Product Esd Information; Laser Safety Information - Metrologic MS7600 Horizon series Service Manual

Hide thumbs Also See for MS7600 Horizon series:
Table of Contents

Advertisement

2.4 General Precautions

** ESD PREVENTION STEPS MUST BE USED DURING ANY
MODIFICATIONS AND/OR REPAIRS TO THIS UNIT! **

2.4.1 PRODUCT ESD INFORMATION:

This product contains ESD sensitive components, or 'Electrostatic Discharge' sensitive electronic parts. Electrostatic
discharge is defined as the transfer of charge between bodies at different electrical potentials.
Electrostatic discharge has the ability to modify the electrical characteristics of a semiconductor device, possibly
degrading or even destroying it. Electrostatic discharge also may upset the normal operation of an electronic system,
causing equipment malfunction or failure.

2.4.2 LASER SAFETY INFORMATION:

Use of controls or adjustments or performance of procedures other than those specified herein may result in
hazardous radiation exposure. Under no circumstances should the customer attempt to service the scanner. Never
attempt to look at the laser beam, even if the scanner appears to be nonfunctional. Doing so could result in hazardous
radiation exposure.
The MS7320 unit is rated as a CLASS IIA laser product, as defined by The U.S. Federal Laser Product Performance
Standard (FLPPS): Title 21 of the Code of Federal Regulations; Part 1000; [Parts 1040.10 and 1040.11].
CLASS I, II, and IIA lasers are defined as:
CLASS I: cannot emit laser radiation at known hazard levels (typically continuous (CW): 0.4microwatts at visible
wavelengths). Users of a Class I laser products are generally exempt from radiation hazard controls during operation
and maintenance (but not necessarily during service).
CLASS II: low power visible lasers, which emit above Class I levels but emitting a radiant power not above 1mW. The
concept is that the human aversion reaction to bright light will protect a person.
CLASS IIA is a special designation that is based upon a 1000 second exposure and applies only to lasers that are "not
intended for viewing" such as a supermarket laser scanner. These laser are emitting light in the visible wavelengths (0.4
to 0.7 mm) with power not above 1mW.
2-4

Advertisement

Table of Contents
loading

Table of Contents