Related Manuals for Adam Equipment DCT 201
Summary of Contents for Adam Equipment DCT 201
- Page 1 Adam Equipment DUNE DCT SERIES (P.N. 9384, Revision B2, June 2013) © Adam Equipment Company 2013...
- Page 2 Easy Reference: Model name of the scale: Serial number of the unit: Software revision number (Displayed when power is first turned on): Date of Purchase: Name of the supplier and place: © Adam Equipment Company 2013...
-
Page 3: Table Of Contents
AC adapter, auto-calibration through the keypad, low-battery indicator, and overload indicator. With its alternate battery operation, splash-proof key pad, and sturdy plastic construction throughout, the Dune will deliver accurate readings both indoors and out. © Adam Equipment Company 2013 P a g e... -
Page 4: Set Up
2) Connect the power adapter to the socket on the back of the machine. Installing Batteries: Remove the battery compartment cover and insert six batteries (R6P/LR6 /AA size) into the battery compartment taking extreme care that the polarities plus and minus are observed. © Adam Equipment Company 2013 P a g e... -
Page 5: Locating And Protecting Your Scale
Do not place near open windows, air-conditioning vents or fans that may cause a draft and unstable readings. Keep the scales clean. Do not stack material on the scale / balance when it is not in use. © Adam Equipment Company 2013 P a g e... -
Page 6: Basic Operation
To determine the weight of a sample, first tare an empty container (if used), then place the sample in the container. The display will show the weight and the unit of weight currently in use. © Adam Equipment Company 2013 P a g e... -
Page 7: Functions
If you do not follow the procedures in a timely manner the machine will automatically switch off and the calibration will not be accepted. © Adam Equipment Company 2013 P a g e... -
Page 8: Trouble Shooting
Change the batteries or use on the power adapter. ErrE E-Prom error Software error turn off and restart. Contact Adam Equipment or your dealer for further assistance. No Power when turning on Change the batteries or use on the power adapter. -
Page 9: Specifications
5.8” x 5.8” Overall Dimensions 145 x 210 x 40mm (w x d x h) 5.8" x 8.3" x 1.6" Gross Weight 1kg, 2.2lb Features Low battery, Stable and Zero indications © Adam Equipment Company 2013 P a g e... -
Page 10: Warranty Information
9.0 WARRANTY INFORMATION Adam Equipment offers Limited Warranty (Parts and Labour) for the components failed due to defects in materials or workmanship. Warranty starts from the date of delivery. During the warranty period, should any repairs be necessary, the purchaser must inform its supplier or Adam Equipment Company. -
Page 11: Fcc Compliance
Shielded interconnect cables must be employed with this equipment to insure compliance with the pertinent RF emission limits governing this device. Changes or modifications not expressly approved by Adam Equipment could void the user's authority to operate the equipment. WEEE COMPLIANCE... - Page 12 For a complete listing of all Adam products visit our website at www.adamequipment.com © Copyright by Adam Equipment Co. All rights reserved. No part of this publication may be reprinted or translated in any form or by any means without the prior permission of Adam Equipment.
Need help?
Do you have a question about the DCT 201 and is the answer not in the manual?
Questions and answers