Specifications - NEC MultiSync 75F-3 Service Manual

Specifications

Monitor
Specifications
Picture Tube
Viewable Image Size:
Input Signal
Display Colors
Synchronization
Range
Resolutions Supported
Resolution based on horizontal and
vertical frequencies only
Active Display Area
(Factory Setting)
Active Display Area
(Full Scan)
Power Supply
Current Rating
Dimensions
Weight (Net)
Environmental Considerations
Operating Temperature:
Storage Temperature:
NOTE: Technical specifications are subject to change without notice.
MultiSync 75F
AccuSync 75F
Diagonal: 43cm(17inch)
41cm(16inch)
Video: ANALOG 0.7Vp-p/75 Ohms
Sync: Separate sync. TTL Level
Horizontal sync. Positive/ Negative
Vertical sync. Positive/Negative
(MS75F: Composite sync. (Positive/Negative) (TTL Level)
Analog input: Unlimited number of Colors
Horizontal: 31 kHz to 70 kHz
Vertical: 55 Hz to 120 Hz
640 × 480 @ 60 to 120 Hz
800 × 600 @ 55 to 110 Hz
832 × 624 @ 55 to 106 Hz
1024 × 768 @ 55 to 87 Hz ......
1152 × 870 @ 55 to 77 Hz
1280 × 1024 @ 55 to 66 Hz
Horizontal: 310 mm/12.2 inches
Vertical: 232 mm/9.1 inches
325 mm/12.8 inches
243 mm/9.6 inches
AC 100 - 240V, 50 - 60Hz
1.5A @ 100 - 240V
403(W) × 420(H) × 420(D) mm
15.9(W) × 16.5(H) × 16.5(D) inches
16.4 kg
36.8 lbs
0° C to + 35° C
Humidity: 30% to 80%
Altitude: 0 to 3000 m
-20° C to + 60° C
Humidity: 10% to 90%
Altitude: 0 to 13700 m
Notes
90° deflection, 0.25mm trio dot pitch, medium
short persistence phosphor, multi-layered,
anti- static screen coating, semi-tint screen,
Invar Shadow Mask and OptiClear screen.
(AS75F: 0.24-0.28 mm variable(diagonal) flat
dot pitch, 0.20-0.25 mm variable(horizontal)
flat dot pitch.)
Depends on display card used.
Automatically
Automatically
Some systems may not support all modes
listed.
NEC-Mitsubishi Electronics Display cites
recommended resolution at 85 Hz for optimal
display performance.
Dependent upon signal timing used,
and does not include border area.
Dependent upon signal timing used,
and does not include border area.
3