IEI Technology IMB-9454G-R40 User Manual
  1. Manuals
  2. Brands
  3. IEI Technology Manuals
  4. Motherboard
  5. IMB-9454G-R40
  6. User manual

IEI Technology IMB-9454G-R40 User Manual

Micro atx motherboard with intel core 2 duo/pentium 4/ pentium d/celeron d cpu with a 533/800/1066 mhz fsb, vga, dual pcie gbe, sata 3gb/s, usb 2.0, audio and com
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
IMB-9454G-R40
IEI Technology Corp.
MODEL:
IMB-9454G-R40
Micro ATX Motherboard with Intel® Core™2 Duo/Pentium® 4/
Pentium® D/Celeron® D CPU with a 533/800/1066 MHz FSB,
VGA, Dual PCIe GbE, SATA 3Gb/s, USB 2.0, Audio and COM
Rev. 4.00 – 1 February, 2011

User Manual

Page I
0-II

Advertisement

Table of Contents
loading

Related Manuals for IEI Technology IMB-9454G-R40

Summary of Contents for IEI Technology IMB-9454G-R40

  • Page 1: User Manual

    IMB-9454G-R40 IEI Technology Corp. MODEL: IMB-9454G-R40 Micro ATX Motherboard with Intel® Core™2 Duo/Pentium® 4/ Pentium® D/Celeron® D CPU with a 533/800/1066 MHz FSB, VGA, Dual PCIe GbE, SATA 3Gb/s, USB 2.0, Audio and COM User Manual Page I Rev. 4.00 – 1 February, 2011...
  • Page 2 IMB-9454G-R40 Revision Date Version Changes 1 February, 2011 4.00 Updated for R40 version December 2006 Added Intel® Core ™ 2 Duo to the supported CPU list September 2006 Initial release Page II 0-II...
  • Page 3 IMB-9454G-R40 Copyright COPYRIGHT NOTICE The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.

  • Page 4: Table Of Contents

    IMB-9454G-R40 Table of Contents INTRODUCTION..................... 1 1.1 IMB-9454G O ..................... 2 VERVIEW 1.1.1 IMB-9454G Applications ................... 2 1.1.2 IMB-9454G Benefits ..................2 1.1.3 IMB-9454G Features ..................3 1.2 IMB-9454G B ................. 3 OARD VERVIEW 1.2.1 IMB-9454G Connectors..................4 1.2.2 Technical Specifications..................5 DETAILED SPECIFICATIONS ................
  • Page 5 IMB-9454G-R40 2.11 R ....................15 LOCK 2.12 I DA) I ..........15 NFRARED SSOCIATION NTERFACE 2.13 USB I ....................15 NTERFACES 2.14 BIOS........................15 2.15 O ........15 PERATING EMPERATURE AND EMPERATURE ONTROL 2.16 A ......................16 UDIO ODEC 2.17 P ...................
  • Page 6 IMB-9454G-R40 3.2.19 SATA Drive Connectors ................. 45 3.2.20 SPDIF Connector................... 46 3.2.21 SPI Flash Connector..................47 3.2.22 TPM Connector....................48 3.2.23 Internal USB Connectors................49 3.3 E ............... 50 XTERNAL NTERFACE ONNECTORS 3.3.1 Audio Connectors..................... 50 3.3.2 CRT Connector ....................51 3.3.3 Ethernet Connectors ..................
  • Page 7 IMB-9454G-R40 4.7 C .................... 74 HASSIS NSTALLATION 4.8 R ..................75 ANEL ONNECTORS 4.8.1 LCD Panel Connection ..................75 4.8.2 Ethernet Connection ..................75 4.8.3 USB Connection....................75 4.8.4 Serial Connection..................... 75 4.8.5 Keyboard and Mouse Connection..............75 4.8.6 Audio Interface....................75 AMI BIOS SETUP....................
  • Page 8 IMB-9454G-R40 5.5 S ........................113 ECURITY 5.6 C ........................114 HIPSET 5.6.1 North Bridge Configuration................116 5.7 E ........................118 SOFTWARE DRIVERS ..................120 6.1 A ................121 VAILABLE OFTWARE RIVERS 6.2 C ................121 HIPSET RIVER NSTALLATION 6.3 VGA D ......................124 RIVER 6.4 R...
  • Page 9 IMB-9454G-R40 List of Figures Figure 1-1: IMB-9454G Board Overview (Top View) ..........3 Figure 2-1: IMB-9454G Dimensions (mm) ..............8 Figure 2-2: External Interface Panel Dimensions (mm)..........9 Figure 3-1: Connector and Jumper Locations ............20 Figure 3-2: Audio Connector Location..............24 Figure 3-3: Audio CD-in Connector Location............25 Figure 3-4: Audio AUX-in Connector Location ............26...
  • Page 10 IMB-9454G-R40 Figure 3-27: VGA Connector ..................51 Figure 3-28: RJ-45 Ethernet Connector ..............53 Figure 3-29: PS/2 Pinouts...................54 Figure 3-30: External Serial Port Connector ............55 Figure 3-31 Parallel Port Connector Pinout Locations..........56 Figure 4-1: Intel LGA775 Socket ................63 Figure 4-2: Remove the CPU Socket Protective Shield...........64 Figure 4-3: Open the CPU Socket Load Plate ............64...
  • Page 11 IMB-9454G-R40 Figure 6-17: Locate Driver Files................132 Figure 6-18: Location Browsing Window............... 133 Figure 6-19: InstallShield Wizard Extracting Files..........134 Figure 6-20: Audio Driver Install Shield Wizard Starting ........134 Figure 6-21: Audio Driver Setup Preparation ............135 Figure 6-22: Audio Driver Digital Signal ..............135 Figure 6-23: Audio Driver Installation Continues ..........
  • Page 12 IMB-9454G-R40 List of Tables Table 1-1: Technical Specifications ................6 Table-2-1: Supported CPUs..................9 Table 2-2: Power Consumption .................17 Table 3-1: Peripheral Interface Connectors..............22 Table 3-2: Rear Panel Connectors................23 Table 3-3: On-board Jumpers ..................23 Table 3-4: Audio Connector Pinouts .................25 Table 3-5: Audio CD-in Connector Pinouts ..............25 Table 3-6: Audio AUX-in Connector Pinouts............26...
  • Page 13 IMB-9454G-R40 Table 3-27: TPM Connector Pinouts................49 Table 3-28: USB3 and USB4 Pinouts.................49 Table 3-29: VGA Connector Pinouts .................52 Table 3-30: LAN1 and LAN2 Pinouts .................52 Table 3-31: RJ-45 Ethernet Connector LEDs............53 Table 3-32: PS/2 Connector Pinouts .................54 Table 3-33: External Serial Port Pinouts ..............55 Table 3-34: Parallel Port Connector Pinouts ............56...
  • Page 14 IMB-9454G-R40 List of BIOS Menus BIOS Menu 1: Main 79 BIOS Menu 2: Advanced.....................81 BIOS Menu 3: CPU Configuration................82 BIOS Menu 4: IDE Configuration ................83 BIOS Menu 5: IDE Master and IDE Slave Configuration..........85 BIOS Menu 6: Floppy Configuration .................89 BIOS Menu 7: Super IO Configuration ..............90...

  • Page 15: Introduction

    IMB-9454G-R40 Chapter Introduction Page 1...

  • Page 16: Imb-9454G Overview

    IMB-9454G-R40 1.1 IMB-9454G Overview The Micro ATX form factor IMB-9454G with Pentium 4 / Pentium D / Celeron D CPU platform is fully equipped with latest technology and advanced multi-mode I/Os. The IMB-9454G is designed for system manufacturers, integrators, and VARs that want performance, reliability, and quality at a reasonable price.

  • Page 17: Imb-9454G Features

    IMB-9454G-R40 1.1.3 IMB-9454G Features Some of the IMB-9454G features are listed below: Complies with RoHS Supports Intel® Pentium 4 / Pentium D / Celeron D CPUs Supports a maximum front side bus (FSB) speed up to 1066MHz Supports up to 4GB of 400MHz, 533MHz or 667MHz of DDR2 memory...

  • Page 18: Imb-9454G Connectors

    IMB-9454G-R40 1.2.1 IMB-9454G Connectors The IMB-9454G has the following connectors on-board: 1 x Audio connector 1 x Audio CD-in connector 1 x Audio AUX-in connector 1 x CPU 12V power connector 2 x DDR2 DIMM sockets 3 x Fan connectors...

  • Page 19: Technical Specifications

    IMB-9454G-R40 1 x Parallel port connector 4 x USB 2.0 ports The IMB-9454G has the following on-board jumpers: Clear CMOS COM2 mode selection (RS-232/422/485) The location of these connectors on the motherboard can be seen in Figure 1-1. These connectors are fully described in Chapter 3.

  • Page 20: Table 1-1: Technical Specifications

    IMB-9454G-R40 Extension One PCIe x16 graphic port One PCIe x1 I/O port Two PCI slots Super I/O ITE8712 IrDA By super I/O Digital I/O 4 input / 4 output by super I/O Audio Interfaces One Audio Codec ’97 (AC’97) version 2.3 connector...

  • Page 21: Detailed Specifications

    IMB-9454G-R40 Chapter Detailed Specifications Page 7...

  • Page 22: Overview

    IMB-9454G-R40 2.1 Overview This chapter describes the specifications and on-board features of the IMB-9454G in detail. 2.2 Dimensions 2.2.1 Board Dimensions The dimensions of the board are listed below: Length: 243.84mm Width: 243.84mm Figure 2-1: IMB-9454G Dimensions (mm) Page 8...

  • Page 23: External Interface Panel Dimensions

    IMB-9454G-R40 2.2.2 External Interface Panel Dimensions External interface panel dimensions are shown in Figure 2-2. Figure 2-2: External Interface Panel Dimensions (mm) 2.3 CPU Support Table-2-1 lists the CPUs supported by the IMB-9454G board. Model Clock Speed L2 Cache Max. FSB Socket ®...

  • Page 24: Intel ® Pentium ® D

    IMB-9454G-R40 Architecture Data Prefetch Logic 667-MHz, Source-Synchronous FSB for Standard Voltage processors Advanced Power Management features including Enhanced Intel SpeedStep® Technology Intel Enhanced Deeper Sleep state and Dynamic Cache Sizing ® ® 2.3.2 Intel Pentium ® ® The Intel Pentium...

  • Page 25: On-Board Chipsets

    IMB-9454G-R40 giving the processor platform access to larger amounts of memory. 512KB Level 2 Cache enables improved overall system performance by giving the core faster access to larger amounts of the data used most often. Streaming SIMD Extensions Accelerates performance on a wide variety of applications including multimedia, video and audio.

  • Page 26: Intel Ich7 Southbridge Chipset

    IMB-9454G-R40 Dual-channel DDR2 memory support 2.4.3 Intel ICH7 Southbridge Chipset The Intel ICH7 southbridge chipset comes with the following features: PCI Express Four PCI Express root ports Supports PCI Express 1.0a Support for full 2.5 Gb/s bandwidth in each direction per x1 lane...

  • Page 27: Memory Support

    64-bit addressing on PCI using DAC protocol is supported 2.8 GbE Ethernet The two GbE controllers (Realtek RTL8111E) on the IMB-9454G-R40 CPU card connect to two 10/100/1000Mb/s Ethernet RJ-45 LAN ports on the rear panel. The Realtek RTL8111E is a 10/100/1000BASE-T Ethernet LAN controller. The RTL8111E combines a triple-speed IEEE 802.3 compliant Media Access Controller (MAC) with a triple-speed...

  • Page 28: Drive Interfaces

    IMB-9454G-R40 2.9 Drive Interfaces The IMB-9454G can support the following drive interfaces. 4 x SATA drives 2 x IDE devices 1 x FDD 2.9.1 SATA Drives The IMB-9454G supports four SATA 3Gb/s drives with transfer rates of up to 3Gb/s.

  • Page 29: Real Time Clock

    IMB-9454G-R40 2.11 Real Time Clock 256-byte battery backed CMOS SRAM 2.12 Infrared Data Association (IrDA) Interface The IMB-9454G IrDA supports the following interfaces. Serial Infrared (SIR) Shift Keyed Infrared (ASKIR) If an IrDA port is need, COM2 must be configured as either SIR or ASKIR mode in the BIOS under Super IO devices.

  • Page 30: Audio Codec

    IMB-9454G-R40 are also mounted on the northbridge and southbridge chipsets to ensure the operating temperature of these chips remain low. 2.16 Audio Codec The IMB-9454G has an integrated Realtek ALC655 codec. The ALC655 codec is a 16-bit, full-duplex AC'97 Rev. 2.3 compatible six-channel audio codec designed for PC multimedia systems, including host/soft audio and AMR/CNR-based designs.

  • Page 31: Power Consumption

    IMB-9454G-R40 Standard 48-pin LQFP package EAX™ 1.0 & 2.0 compatible Direct Sound 3D™ compatible A3D™ compatible I3DL2 compatible HRTF 3D positional audio 10-band software equalizer Voice cancellation and key shifting in Karaoke mode AVRack® Media Player Configuration Panel for improved user convenience 2.17 Power Consumption...

  • Page 32: Optional Accessory Items

    IMB-9454G-R40 1 x I/O shielding 1 x Mini jumper pack 1 x Utility CD 1 x Quick Installation Guide 2.18.2 Optional Accessory Items The items shown in the list below are optional accessory items are purchased separately. FDD cable USB cable...

  • Page 33: Connectors And Jumpers

    IMB-9454G-R40 Chapter Connectors and Jumpers Page 19...

  • Page 34: Peripheral Interface Connectors

    IMB-9454G-R40 3.1 Peripheral Interface Connectors Section 3.1.1 shows peripheral interface connector locations. Section 3.1.2 lists all the peripheral interface connectors seen in Section 3.1.1. 3.1.1 IMB-9454G Layout Figure 3-1 shows the on-board peripheral connectors, backplane peripheral connectors and on-board jumpers.

  • Page 35: Peripheral Interface Connectors

    IMB-9454G-R40 3.1.2 Peripheral Interface Connectors Table 3-1 shows a list of the peripheral interface connectors on the IMB-9454G. Detailed descriptions of these connectors can be found in Section 3.2. Connector Type Label Audio connector 8-pin header Audio CD-in connector 4-pin header...

  • Page 36: Table 3-1: Peripheral Interface Connectors

    IMB-9454G-R40 PCI Express x1 socket PCI Express x1 slot PCIE1 PCI Express x16 socket PCI Express x16 slot PCIE2 PCI Express power connector 4-pin header PCN1 Power connector 24-pin connector PWR1 RS-422/485 connector 4-pin header Serial port connector (1) 10-pin header...

  • Page 37: Rear Panel Connectors

    IMB-9454G-R40 3.1.3 Rear Panel Connectors Table 3-2 lists the rear panel connectors on the IMB-9454G. Detailed descriptions of these connectors can be found in Section 3.3. Connector Type Label Audio Jacks Audio connector CRT connector 15-pin female connector 3IN1_DSUB1C Ethernet connector (1)

  • Page 38: Internal Peripheral Connectors

    IMB-9454G-R40 3.2 Internal Peripheral Connectors Internal peripheral connectors are found on the motherboard and are only accessible when the motherboard is outside of the chassis. This section has complete descriptions of all the internal, peripheral connectors on the IMB-9454G. 3.2.1 Audio Connector...

  • Page 39: Audio Cd-In Connector

    IMB-9454G-R40 PIN NO. DESCRIPTION PIN NO. DESCRIPTION SUROUT_L CENOUT GND AUDIO GND AUDIO SUROUT_R LFEOUT GND AUDIO Table 3-4: Audio Connector Pinouts 3.2.2 Audio CD-in Connector CN Label: CD IN1 CN Type: 4-pin headers (1x4) CN Location: See Figure 3-3...

  • Page 40: Audio Aux-In Connector

    IMB-9454G-R40 3.2.3 Audio AUX-in Connector CN Label: AUX1 CN Type: 4-pin headers (1x4) CN Location: See Figure 3-4 CN Pinouts: See Table 3-6 The AUX-in connector supports additional audio sources. Figure 3-4: Audio AUX-in Connector Location PIN NO. DESCRIPTION PIN NO. DESCRIPTION...

  • Page 41: Fan Connectors

    IMB-9454G-R40 CN Pinouts: See Table 3-7 The connector supports the 12V power supply. Figure 3-5: CPU 12V Power Connector Location PIN NO. DESCRIPTION PIN NO. DESCRIPTION +12VDC +12VDC Table 3-7: CPU 12V Power Connector Pinouts 3.2.5 Fan Connectors CN Label:...

  • Page 42: Figure 3-6: Fan Connector Locations

    IMB-9454G-R40 Figure 3-6: Fan Connector Locations PIN NO. DESCRIPTION +12V Linear control Fan Sensor Table 3-8: CPU Fan Connector Pinouts PIN NO. DESCRIPTION Linear control Fan Sensor Table 3-9: System Fan Connector Pinouts Page 28 Page 28...

  • Page 43: Fdd Connector

    IMB-9454G-R40 3.2.6 FDD Connector CN Label: FDC1 CN Type: 34-pin header (2x17) CN Location: See Figure 3-7 CN Pinouts: See Table 3-10 The floppy disk connector (FDC1) is connected to a floppy disk drive. Figure 3-7: FDD Connector Connector Location PIN NO.

  • Page 44: Front Panel Audio Connector

    IMB-9454G-R40 GROUND MOTOR ENABLE B# GROUND DIRECTION# GROUND STEP# GROUND WRITE DATA# GROUND WRITE GATE# GROUND TRACK 0# GROUND WRITE PROTECT# GROUND READ DATA# GROUND SIDE 1 SELECT# GROUND DISK CHANGE# Table 3-10: FDD Connector Pinouts 3.2.7 Front Panel Audio Connector...

  • Page 45: Front Panel Connector

    IMB-9454G-R40 PIN NO. DESCRIPTION PIN NO. DESCRIPTION MIC IN GROUND MIC BIAS LINE OUT (R) LINE OUT (R) Return LINE OUT (L) LINE OUT (L) Return Table 3-11: Front Panel Audio Connector Pinouts 3.2.8 Front Panel Connector CN Label: CN Type:...

  • Page 46: Gpio Connector

    IMB-9454G-R40 Figure 3-9: Front Panel Connector Location PIN NO. DESCRIPTION PIN NO. DESCRIPTION ACPILED+ SPEAKER+ ACPILED- ATX POWER BUTTON SPEAKER- IDE LED+ RESET SW IDE LED - Table 3-12: Front Panel Connector Pinouts 3.2.9 GPIO Connector CN Label: DIO1 CN Type:...

  • Page 47: Hd Audio Connector

    IMB-9454G-R40 The General Purpose Input Output (GPIO) connector can be connected to external I/O control devices including sensors, lights, alarms and switches. Figure 3-10: GPIO Connector Location PIN NO. DESCRIPTION PIN NO. DESCRIPTION Output 3 Output 2 Output 1 Output 0...

  • Page 48: Ide Connector

    IMB-9454G-R40 Figure 3-11: HD Audio Connector Location PIN NO. DESCRIPTION PIN NO. DESCRIPTION HD_CLK HD_RST- 3.3V HD_SYNC HD_SDOUT 3.3V AC_SDIN1 +12V DUMMY NET DUMMY NET 3VDUAL DUMMY NET Table 3-14: HD Audio Connector Pinouts 3.2.11 IDE Connector CN Label: IDE1...

  • Page 49: Figure 3-12: Ide Device Connector Location

    IMB-9454G-R40 Figure 3-12: IDE Device Connector Location PIN NO. DESCRIPTION PIN NO. DESCRIPTION RESET# DATA 7 DATA 8 DATA 6 DATA 9 DATA 5 DATA 10 DATA 4 DATA 11 DATA 3 DATA 12 DATA 2 DATA 13 DATA 1...

  • Page 50: Ir Interface Connector

    IMB-9454G-R40 PIN NO. DESCRIPTION PIN NO. DESCRIPTION SA 0 SA 2 HDC CS0# HDC CS1# HDD ACTIVE# Table 3-15: IDE Connector Pinouts 3.2.12 IR Interface Connector CN Label: CN Type: 5-pin header (1x5) CN Location: See Figure 3-13 CN Pinouts:...

  • Page 51: Pci Express X1 Slot

    IMB-9454G-R40 IR-RX IR-TX Table 3-16: IR Connector Pinouts 3.2.13 PCI Express x1 Slot CN Label: PCIE1 CN Type: 36-pin header (2x18) CN Location: See Figure 3-14 CN Pinouts: See Table 3-17 PCIe x1 expansion devices can be inserted into the PCIe x1 slots.

  • Page 52: Pci Express X16 Slot

    IMB-9454G-R40 SMCLK JTAG2 SMDAT JTAG3 JTAG4 +3.3v JTAG5 JTAG1 +3.3v 3.3Vaux +3.3v WAKE# PWRGD RSVD REFCLK+ HSOp(0) REFCLK- HSOn(0) HSIp(0) PRSNT#2 HSIn(0) Table 3-17: PCI Express x1 Slot Pinouts 3.2.14 PCI Express x16 Slot CN Label: PCIE2 CN Type: 164-pin PCIe x16 slot...

  • Page 53: Figure 3-15: Pci Express X16 Slot Location

    IMB-9454G-R40 Figure 3-15: PCI Express x16 Slot Location NAME NAME NAME NAME Name HSIn(1) HSIp(6) HSIp(11) PRSNT#1 HSIn(6) HSIn(11) +12v +12v HSIp(2) HSIn(2) HSIp(7) HSIp(12) JTAG2 HSIn(7) HSIn(12) JTAG3 JTAG4 HSIp(3) RSVD JTAG5 HSIn(3) HSIp(13) +3.3v HSIp(8) HSIn(13) +3.3v RSVD...

  • Page 54: Pci Express Power Connector

    IMB-9454G-R40 RSVD Table 3-18: PCIe x16 Side A Pinouts NAME NAME NAME NAME +12v +12v HSOp(2) RSVD HSOn(2) HSOp(7) HSOp(12) HSOn(7) HSOn(12) SMCLK SMDAT HSOp(3) PRSNT#2 HSOn(3) HSOp(13) +3.3v HSOp(8) HSOn(13) JTAG1 RSVD HSOn(8) 3.3Vaux PRSNT#2 WAKE# HSOp(14) RSVD HSOp(4)

  • Page 55: Power Connector

    IMB-9454G-R40 CN Pinouts: See Table 3-20 This 4-pin power connector supports the power for PCI Express x16 module. Figure 3-16: PCIe x16 Power Connector Location PIN NO. DESCRIPTION +12V Table 3-20: PCIe x16 Power Connector Pinouts 3.2.16 Power Connector CN Label:...

  • Page 56: Figure 3-17: Power Connector Location

    IMB-9454G-R40 Figure 3-17: Power Connector Location PIN NO. DESCRIPTION PIN NO. DESCRIPTION 3.3V 3.3V 3.3V -12V Ground Ground PS_ON Ground Ground Ground Ground Ground PWR_OK 5VSB 3.3V Ground Table 3-21: Power Connector Pinouts Page 42 Page 42...

  • Page 57: Rs-422/485 Connector

    IMB-9454G-R40 3.2.17 RS-422/485 Connector CN Label: CN Type: 4-pin header (1x4) CN Location: See Figure 3-18 CN Pinouts: See Table 3-22 The CN1 serial port connector connects to an RS-422, or RS-485 serial port devices. Figure 3-18: RS-422/485 Connector Location PIN NO.

  • Page 58: Figure 3-19: Serial Port Connector Locations

    IMB-9454G-R40 CN Location: See Figure 3-19 CN Pinouts: See Table 3-23 The serial ports connectors connect to RS-232 serial port device. Figure 3-19: Serial Port Connector Locations PIN NO. DESCRIPTION PIN NO. DESCRIPTION Table 3-23: COM2 COM3, COM4, COM5 and COM6 Pinouts...

  • Page 59: Sata Drive Connectors

    IMB-9454G-R40 3.2.19 SATA Drive Connectors CN Label: SATA1, SATA2, SATA3 and SATA4 CN Type: 1x7 pin SATA drive connectors CN Location: See Figure 3-20 CN Pinouts: See Table 3-24 The four SATA drive connectors are connected to four SATA 3Gb/s drives. SATA 3Gb/s drives transfer data at speeds as high as 3Gb/s.

  • Page 60: Spdif Connector

    IMB-9454G-R40 3.2.20 SPDIF Connector CN Label: CN Type: 5-pin header (1x5) CN Location: See Figure 3-21 CN Pinouts: See Table 3-25 The SPDIF connector connects to the S/PDIF audio module, which bears S/PDIF digital output. S/PDIF (Sony/Philips Digital Interface) is a newest audio transfer file format, which allows the user to enjoy digital audio.

  • Page 61: Spi Flash Connector

    IMB-9454G-R40 3.2.21 SPI Flash Connector CN Label: JSPI1 CN Type: 6-pin wafer CN Location: See Figure 3-22 CN Pinouts: See Table 3-26 The 6-pin SPI Flash connector is used to flash the BIOS. Figure 3-22: SPI Flash Connector Location PIN NO.

  • Page 62: Tpm Connector

    IMB-9454G-R40 3.2.22 TPM Connector CN Label: TPM1 CN Type: 20-pin connector CN Location: See Figure 3-23 CN Pinouts: See Table 3-27 The TPM (Trusted Platform Module) connector is a device with a controller that is used to check authenticity of digital signs and keys as well as other encryption and security functions.

  • Page 63: Internal Usb Connectors

    IMB-9454G-R40 +3.3SBY SER_IRQ CLKRUN# LPC_PD# LDRQ# Table 3-27: TPM Connector Pinouts 3.2.23 Internal USB Connectors CN Label: USB3 and USB4 CN Type: 8-pin header (2x4) CN Location: See Figure 3-24 CN Pinouts: See Table 3-28 One 2x4 pin connector provides connectivity to two USB 2.0 ports. The USB ports are used for I/O bus expansion.

  • Page 64: External Interface Connectors

    IMB-9454G-R40 3.3 External Interface Connectors The peripheral connectors on the back panel are connected to devices externally when the IMB-9454G is installed in a chassis. The peripheral connectors on the rear panel are: 3 x Audio jacks 1 x CRT connector...

  • Page 65: Crt Connector

    IMB-9454G-R40 Line In port (Light Blue): Connects a CD-ROM, DVD player, or other audio devices. Speaker Out port (Lime): Connects to a headphone or a speaker. With multi-channel configurations, this port can also connect to front speakers. Microphone (Pink): Connects a microphone.

  • Page 66: Ethernet Connectors

    IMB-9454G-R40 PIN NO. DESCRIPTION PIN NO. DESCRIPTION GREEN BLUE DDC DAT HSYNC VSYNC DDC CLK Table 3-29: VGA Connector Pinouts 3.3.3 Ethernet Connectors CN Label: LAN/USB1A and LAN/USB2A CN Type: RJ-45 CN Location: See Figure 3-25 (labeled number 4 and 6)

  • Page 67: Keyboard/Mouse Connector

    IMB-9454G-R40 Figure 3-28: RJ-45 Ethernet Connector The RJ-45 Ethernet connector has two status LEDs, one green and one yellow. The green LED indicates activity on the port and the yellow LED indicates the port is linked. See Table 3-31. SPEED LED...

  • Page 68: Serial Port Connectors

    IMB-9454G-R40 Figure 3-29: PS/2 Pinouts DESCRIPTION DESCRIPTION L_KDAT L_MDAT L_KCLK L_MCLK Table 3-32: PS/2 Connector Pinouts 3.3.5 Serial Port Connectors CN Label: 3IN1_DSUB1B CN Type: DB-9 CN Location: See Figure 3-25 (labeled number 9) CN Pinouts: See Table 3-33 The serial ports can be connected to a serial communications device directly.

  • Page 69: Parallel Port Connector

    IMB-9454G-R40 Figure 3-30: External Serial Port Connector Description DATA CARRIER DETECT (DCD) RECEIVE DATA (RXD) TRANSMIT DATA (TXD) DATA TERMINAL READY (DTR) GROUND (GND) DATA SET READY (DSR) REQUEST TO SEND (RTS) CLEAR TO SEND (CTS) RING INDICATOR (RI) Table 3-33: External Serial Port Pinouts 3.3.6 Parallel Port Connector...

  • Page 70: Usb Connector

    IMB-9454G-R40 Figure 3-31 Parallel Port Connector Pinout Locations Description Description STROBE# DATA 0 DATA 1 DATA 2 DATA 3 DATA 4 DATA 5 DATA 6 DATA 7 ACKNOWLEDGE BUSY PAPER EMPTY PRINTER SELECT AUTO FORM FEED # ERROR# INITIALIZE PRINTER SELECT LN# Table 3-34: Parallel Port Connector Pinouts 3.3.7 USB Connector...

  • Page 71: Table 3-35: External Usb Connector Pinouts

    IMB-9454G-R40 PIN NO. DESCRIPTION PIN NO. DESCRIPTION USBD0- USBD0- USBD0+ USBD0+ Table 3-35: External USB Connector Pinouts Page 57...

  • Page 72: Installation And Configuration

    IMB-9454G-R40 Chapter Installation and Configuration Page 58 Page 58...

  • Page 73: Anti-Static Precautions

    IMB-9454G-R40 4.1 Anti-static Precautions Electrostatic discharge (ESD) can cause serious damage to electronic components, including the IMB-9454G. (Dry climates are especially susceptible to ESD.) It is therefore critical that whenever the IMB-9454G (or any other electrical component) is handled, the following anti-static precautions are strictly adhered to.

  • Page 74: Unpacking

    IMB-9454G-R40 When installing or configuring the motherboard, place it on an antistatic pad. This helps to prevent potential ESD damage. Turn off all power to the IMB-9454G When working with the motherboard, make sure that it is disconnected from all power supplies and that no electricity is being fed into the system.

  • Page 75: Checklist

    4.4 IMB-9454G motherboard Installation WARNING! 1. Never run the motherboard without an appropriate heat sink and cooler that can be ordered from IEI Technology or purchased separately. 2. Be sure to use the CPU 12V power connector for the CPU power. WARNING!

  • Page 76: Socket Lga775 Cpu Installation

    IMB-9454G-R40 and injury to the user. WARNING! When installing electronic components onto the motherboard always take the following anti-static precautions in order to prevent ESD damage to the motherboard and other electronic components like the CPU and DIMM modules The following components must be installed onto the motherboard or connected to the motherboard during the installation process.

  • Page 77: Figure 4-1: Intel Lga775 Socket

    IMB-9454G-R40 properly installed before the IMB-9454G is run. If a heat sink and cooling fan are not properly installed both the CPU and the board may be damaged. The LGA775 socket is shown in Figure 4-1. Figure 4-1: Intel LGA775 Socket WARNING: When handling the CPU, only hold it on the sides.

  • Page 78: Figure 4-2: Remove The Cpu Socket Protective Shield

    IMB-9454G-R40 Figure 4-2: Remove the CPU Socket Protective Shield Step 2: Open the socket. Disengage the load lever by pressing the lever down and slightly outward to clear the retention tab. Rotate the load lever to a fully open position. Then rotate the load plate towards the opposite direction. (See Figure...

  • Page 79: Socket Lga775 Cooling Kit (Cf-520) Installation

    IMB-9454G-R40 Step 6: Align the CPU pins. Locate pin 1 and the two orientation notches on the CPU. Carefully match the two orientation notches on the CPU with the socket alignment keys. Step 7: Insert the CPU. Gently insert the CPU into the socket. If the CPU pins are properly aligned, the CPU should slide into the CPU socket smoothly.

  • Page 80: Figure 4-5: Iei Lga-775 Cooling Kit

    IMB-9454G-R40 The IMB-9454G is vertically mounted on a horizontal backplane, and Intel’s heat sink does not come with a support bracket on the soldering side, the PCB may be bent by the weight of the cooling kit. IEI’s cooling kit (CF-520) includes a support bracket that is combined with the heat sink mounted on the CPU to counterweigh and balance the load on both sides of the PCB.

  • Page 81: Figure 4-6: Securing The Heat Sink To The Pcb Board

    IMB-9454G-R40 pass through the pre-drilled holes on the PCB. Step 3: Mount the cooling kit. Gently place the cooling kit on top of the CPU. Make sure the four threaded screws on the corners of the cooling kit properly pass through the predrilled holes on the bottom of the PCB.

  • Page 82: Dimm Module Installation

    IMB-9454G-R40 4.5.3 DIMM Module Installation 4.5.3.1 Purchasing the Memory Module WARNING! When purchasing the DIMM modules, make sure the modules are compatible with the DIMM slot specified in Section 2.5 Memory Support. WARNING! The board supports DDR2 DIMM modules only. DDR1 and DDR2 are not compatible.

  • Page 83: Peripheral Device Connection

    IMB-9454G-R40 Figure 4-7: Installing the DIMM Module Step 2: Slowly slide the DIMM module along the plastic guides on both ends of the socket. Press the DIMM module down into the socket until it clicks into position and the two handles have automatically locked the memory module into place (Figure 4-8).

  • Page 84: Ide Disk Drive Connector (Ide1)

    IMB-9454G-R40 Quantity Type IDE flat cable SATA cables SATA power cable RS-232 cables RS-422/485 cable Power cable Table 4-1: IEI Provided Cables 4.5.4.1 IDE Disk Drive Connector (IDE1) The cable used to connect the motherboard to the IDE device is a standard 40-pin ATA/100 flat cable.

  • Page 85: Floppy Drive Connector

    IMB-9454G-R40 NOTE: When two IDE disk drives are connected together, back-end jumpers on the drives must be used to configure one drive as a master and the other as a slave. 4.5.4.2 Floppy Drive Connector The floppy drive connector provides access to one externally mounted floppy drive (3.5”-profile, 1.44 MB type floppy drive).

  • Page 86: On-Board Jumpers

    IMB-9454G-R40 4.6 On-board Jumpers NOTE: A jumper is a metal bridge that is used to close an electrical circuit. It consists of two metal pins and a small metal clip (often protected by a plastic cover) that slides over the pins to connect them.

  • Page 87: Clear Cmos Jumper

    IMB-9454G-R40 Figure 4-11: Jumper Locations 4.6.1 Clear CMOS Jumper Jumper Label: Jumper Type: 3-pin header Jumper Settings: See Table 4-3 Jumper Location: See Figure 4-11 If the IMB-9454G fails to boot due to improper BIOS settings, use this jumper to clear the CMOS data and reset the system BIOS information.

  • Page 88: Com2 Mode Selection

    IMB-9454G-R40 Clear CMOS DESCRIPTION Short 1-2 Normal Operation (Default) Short 2-3 Clear CMOS Setup Table 4-3: Clear CMOS Jumper Settings The clear CMOS jumper is located in Figure 4-11. 4.6.2 COM2 Mode Selection Jumper Label: Jumper Type: 3-pin header Jumper Settings:...

  • Page 89: Rear Panel Connectors

    IMB-9454G-R40 4.8 Rear Panel Connectors 4.8.1 LCD Panel Connection The conventional CRT monitor connector is a 15-pin, female D-SUB connector. Pin assignments can be seen in that can be connected to external monitors. 4.8.2 Ethernet Connection The rear panel RJ-45 connectors can be connected to an external LAN and communicate with data transfer rates up to 1Gb/s.

  • Page 90: Ami Bios Setup

    IMB-9454G-R40 Chapter AMI BIOS Setup Page 76 Page 76...

  • Page 91: Introduction

    IMB-9454G-R40 5.1 Introduction A licensed copy of AMI BIOS is preprogrammed into the ROM BIOS. The BIOS setup program allows users to modify the basic system configuration. This chapter describes how to access the BIOS setup program and the configuration options that may be changed.

  • Page 92: Getting Help

    IMB-9454G-R40 F2 /F3 key Change color from total 3 colors. F2 to select color forward. F10 key Save all the CMOS changes, only for Main Menu Table 5-1: BIOS Navigation Keys 5.1.3 Getting Help When F1 is pressed a small help window describing the appropriate keys to use and the possible selections for the highlighted item appears.

  • Page 93: Bios Menu 1: Main

    IMB-9454G-R40 BIOS Menu 1: Main System Overview The System Overview lists a brief summary of different system components. The fields in System Overview cannot be changed. The items shown in the system overview include: AMI BIOS: Displays auto-detected BIOS information...

  • Page 94: Advanced

    IMB-9454G-R40 System Time [xx:xx:xx]: The system time is set here. System Date [Day xx/xx/xxxx]: The system date is set here. 5.3 Advanced The Advanced menu (BIOS Menu 2) allows access to the CPU and peripheral device configuration options through the following sub-menus:...

  • Page 95: Cpu Configuration

    IMB-9454G-R40 BIOS Menu 2: Advanced 5.3.1 CPU Configuration The CPU Configuration menu (BIOS Menu 3) shows detailed CPU specifications and CPU configuration options. Page 81...

  • Page 96: Ide Configuration

    IMB-9454G-R40 BIOS Menu 3: CPU Configuration The CPU Configuration menu (BIOS Menu 3) lists the following CPU details: Manufacturer: Lists the name of the CPU manufacturer Brand String: Lists the brand name of the CPU being used Frequency: Lists the CPU processing speed...

  • Page 97: Bios Menu 4: Ide Configuration

    IMB-9454G-R40 BIOS Menu 4: IDE Configuration ATA/IDE Configuration [Compatible] The ATA/IDE Configuration BIOS option allows the user to configure the ATA/IDE device mode. Disabled Disable all ATA/IDE ports. No Primary/Secondary IDE mode is presented for configuration Compatible Up to 6 HDDs can be used, four for SATA and the other EFAULT for PATA IDE.

  • Page 98: Ide Master, Ide Slave

    IMB-9454G-R40 Legacy IDE Channels [SATA Pri, PATA Sec] Use the Legacy IDE Channels option configures PATA and SATA resources for operating systems that require legacy IDE operation. SATA Only Enable up to four SATA devices This option allows the system to access the primary IDE...

  • Page 99: Bios Menu 5: Ide Master And Ide Slave Configuration

    IMB-9454G-R40 BIOS Menu 5: IDE Master and IDE Slave Configuration Auto-Detected Drive Parameters The “grayed-out” items in the left frame are IDE disk drive parameters automatically detected from the firmware of the selected IDE disk drive. The drive parameters are listed as follows: Device: Lists the device type (e.g.
  • Page 100 IMB-9454G-R40 S.M.A.R.T.: Indicates whether or not the Self-Monitoring Analysis and Reporting Technology protocol is supported. Type [Auto] The Type BIOS option determines the type of device that the AMIBIOS attempts to boot from after the Power-On Self-Test (POST) has completed.
  • Page 101 IMB-9454G-R40 Auto This option allows the BIOS to auto detect the LBA mode EFAULT control on the specified channel. Block (Multi Sector Transfer) [Auto] Disabled Selecting this option prevents the BIOS from using Multi-Sector Transfer on the specified channel. The data to and from the device occurs one sector at a time.

  • Page 102: Floppy Configuration

    IMB-9454G-R40 CD-ROM drives, check the specifications of the drive.) DMA Mode [Auto] The DMA Mode BIOS selection adjusts the DMA mode options. Auto The BIOS auto detects the DMA mode. Use this value if the EFAULT IDE disk drive support cannot be determined.

  • Page 103: Super Io Configuration

    IMB-9454G-R40 BIOS Menu 6: Floppy Configuration Floppy A [1.44 MB 3½”] The Floppy A configuration option determines the types of the floppy drive installed in the system. The following configuration options are available. Disabled (default) 360 KB 5¼” 1.2 MB 5¼”...

  • Page 104: Bios Menu 7: Super Io Configuration

    IMB-9454G-R40 BIOS Menu 7: Super IO Configuration Serial Port1 Address [3F8/IRQ4] The Serial Port1 Address option allows BIOS to select the Serial Port 1 base address. No base address is assigned to Serial Port 1 Disabled 3F8/IRQ4 Serial Port 1 I/O port address is 3F8 and the interrupt...
  • Page 105 IMB-9454G-R40 Normal Serial Port 1 mode is normal EFAULT IrDA Serial Port 1 mode is IrDA ASK IR Serial Port 1 mode is ASK IR Serial Port2 Address [2F8/IRQ3] The Serial Port2 Address option allows BIOS to select the Serial Port 2 base address.
  • Page 106 IMB-9454G-R40 Parallel Port I/O port address is 3BC Parallel Port Mode [Normal] The Parallel Port Mode selection selects the mode the parallel port operates in. Normal The normal parallel port mode is the standard mode EFAULT for parallel port operation.
  • Page 107 IMB-9454G-R40 Serial Port3 Address [3E8] This option allows BIOS to select the base addresses for serial port 3 Disabled No base address is assigned to serial port 3 Serial port 3 I/O port address is 3E8 EFAULT Serial port 3 I/O port address is 2E8...
  • Page 108 IMB-9454G-R40 Serial Port5 Address [2F0] This option allows BIOS to select the base addresses for serial port 5. Disabled No base address is assigned to serial port 5 Serial port 5 I/O port address is 3E8 Serial port 5 I/O port address is 2E8...

  • Page 109: Hardware Health Configuration

    IMB-9454G-R40 Serial port 6 IRQ address is 11 5.3.5 Hardware Health Configuration The Hardware Health Configuration menu (BIOS Menu 8) shows the operating temperature, fan speeds and system voltages. BIOS Menu 8: Hardware Health Configuration FAN 1 Mode Setting: [Full On]...
  • Page 110 IMB-9454G-R40 Temperature 1 Limit of Start Temperature 1 Limit of Full Fan 1 Start PWM Slop PWM 1: 0 PWM, 1 PWM (Default), 2 PWM, 4 PWM, 8 PWM, 16 PWM, 32 PWM or 64 PWM FAN 2 Mode Setting: [Full On]...

  • Page 111: Acpi Configuration

    IMB-9454G-R40 Temperature 3 Limit of Start Temperature 3 Limit of Full Fan 3 Start PWM Slop PWM 3: 0 PWM, 1 PWM (Default), 2 PWM, 4 PWM, 8 PWM, 16 PWM, 32 PWM or 64 PWM The following system parameters and values are shown. The system parameters that are...

  • Page 112: General Acpi Configuration

    IMB-9454G-R40 BIOS Menu 9: ACPI Configuration ACPI Aware O/S [Yes] Use the ACPI Aware O/S option to enable the system to configure ACPI power saving options. ACPI can only be implemented if the system OS complies with the ACPI standard.

  • Page 113: Apm Configuration

    IMB-9454G-R40 BIOS Menu 10: General ACPI Configuration [Advanced\ ACPI Configuration] Suspend mode [S1 (POS)] Use the Suspend Mode option to specify the sleep state the system enters when it is not being used. S1 (POS) The system enters S1(POS) sleep state. The system EFAULT appears off.

  • Page 114: Bios Menu 11: Apm Configuration

    IMB-9454G-R40 BIOS Menu 11: APM Configuration Power Management/APM [Enabled] The Power Management/APM BIOS option accesses the advanced power management features. Disabled Disables the Advanced Power Management (APM) feature Enabled Enables the APM feature EFAULT Power Button Mode [On/Off] The Power Button Mode BIOS specifies how the power button functions.
  • Page 115 IMB-9454G-R40 Suspend When the power button is pressed the system goes into suspend mode Restore on AC Power Loss [Last State] The Restore on AC Power Loss BIOS option specifies what state the system returns to if there is a sudden loss of power to the system.

  • Page 116: Mps Configuration

    IMB-9454G-R40 Resume On RTC Alarm [Disabled] The Resume On RTC Alarm determines when the computer will be roused from a suspended state. Disabled The real time clock (RTC) cannot generate a wake EFAULT event Enabled If selected, the following will appear with values that...

  • Page 117: Usb Configuration

    IMB-9454G-R40 BIOS Menu 12: MPS Configuration MPS Revision [1.4] Use the Multiprocessor Specification (MPS) for OS option to specify the MPS version to be used. MPS version 1.1 is used MPS version 1.4 is used EFAULT 5.3.9 USB Configuration Use the USB Configuration menu (BIOS Menu 13) to read USB configuration information and configure the USB settings.

  • Page 118: Bios Menu 13: Usb Configuration

    IMB-9454G-R40 BIOS Menu 13: USB Configuration USB Configuration The USB Configuration field shows the system USB configuration. The items listed are: Module Version: x.xxxxx.xxxxx USB Devices Enabled The USB Devices Enabled field lists the USB devices that are enabled on the system...
  • Page 119 IMB-9454G-R40 4 USB Ports Four USB ports are activated. 6 USB Ports Six USB ports are activated. 8 USB Ports Eight USB ports are activated. EFAULT USB 2.0 Controller [Enabled] Use the USB 2.0 Controller BIOS option to enable or disable the USB 2.0 controller USB 2.0 controller enabled...

  • Page 120: Usb Mass Storage Device Configuration

    IMB-9454G-R40 5.3.9.1 USB Mass Storage Device Configuration Use the USB Mass Storage Device Configuration menu (BIOS Menu 14) to configure USB mass storage class devices. BIOS Menu 14: USB Mass Storage Device Configuration Device ## The Device## field lists the USB devices that are connected to the system.

  • Page 121: Boot Settings Configuration

    IMB-9454G-R40 BIOS Menu 15: Boot 5.4.1 Boot Settings Configuration Use the Boot Settings Configuration menu (BIOS Menu 16) to configure advanced system boot options. Page 107...

  • Page 122: Bios Menu 16: Boot Settings Configuration

    IMB-9454G-R40 BIOS Menu 16: Boot Settings Configuration Quick Boot [Enabled] Use the Quick Boot BIOS option to make the computer speed up the boot process. No POST procedures are skipped Disabled Enabled Some POST procedures are skipped to decrease EFAULT...
  • Page 123 IMB-9454G-R40 AddOn ROM Display Mode [Force BIOS] Use the AddOn ROM Display Mode option to allow add-on ROM (read-only memory) messages to be displayed. Force BIOS The system forces third party BIOS to display EFAULT during system boot. Keep Current The system displays normal information during system boot.

  • Page 124: Boot Device Priority

    IMB-9454G-R40 Boot From LAN Support [Disabled] The BOOT From LAN Support option enables the system to be booted from a remote system. Disabled Cannot be booted from a remote system through the EFAULT Enabled Can be booted from a remote system through the 5.4.2 Boot Device Priority...

  • Page 125: Hard Disk Drives

    IMB-9454G-R40 5.4.3 Hard Disk Drives Use the Hard Disk Drives menu to specify the boot sequence of the available HDDs. When the menu is opened, the HDDs connected to the system are listed as shown below: 1st Drive [HDD: PM-(part number)] NOTE: Only the drives connected to the system are shown.

  • Page 126: Cd/Dvd Drives

    IMB-9454G-R40 The boot sequence from the available devices is selected. If the “1st Drive” option is selected a list of available FDDs is shown. Select the first FDD the system boots from. If the “1st Drive” is not used for booting this option may be disabled.

  • Page 127: Security

    IMB-9454G-R40 two CDs or DVDs are connected only “1st Drive” and “2nd Drive” are listed. The boot sequence from the available devices is selected. If the “1st Drive” option is selected a list of available CD/DVD drives is shown. Select the first CD/DVD drive the system boots from.

  • Page 128: Chipset

    IMB-9454G-R40 this field and enter the password. After the password has been added, Install appears next to Change Supervisor Password. Change User Password Use the Change User Password to set or change a user password. The default for this option is Not Installed. If a user password must be installed, select this field and enter the password.

  • Page 129: Bios Menu 20: Chipset

    IMB-9454G-R40 BIOS Menu 20: Chipset Audio Controller [AC’97 Audio Only], Use the Audio Controller option to select the audio specification to apply on the system. The audio specification is set to AC’ 97 CODEC only. AC’97 Audio EFAULT Only All Disabled All the audio specifications are disabled.

  • Page 130: North Bridge Configuration

    IMB-9454G-R40 OnBoard LAN2 [Enabled] The OnBoard LAN2 option enables or disables the onboard LAN1. Disabled Onboard LAN2 device manually disabled Enabled The onboard LAN2 device automatically detected and EFAULT enabled 5.6.1 North Bridge Configuration Use the NorthBridge Configuration menu (BIOS Menu 21) to configure the northbridge chipset.
  • Page 131 IMB-9454G-R40 Auto Automatically selects the DRAM frequency EFAULT 400MHz Sets the DRAM frequency to 400MHz 533MHz Sets the DRAM frequency to 533MHz 667MHz Sets the DRAM frequency to 667MHz Configure DRAM Timing by SPD [Enabled] Use the Configure DRAM Timing by SPD option to determine if the system uses the SPD (Serial Presence Detect) EEPROM to configure the DRAM timing.

  • Page 132: Exit

    IMB-9454G-R40 Disabled Memory is not reserved for ISA expansion cards EFAULT 15MB – 16MB Between 15MB and 16MB of memory is reserved for ISA expansion cards Internal Graphics Mode Select [Enable, 8MB] Use the Internal Graphic Mode Select option to specify the amount of system memory that can be used by the Internal graphics device.
  • Page 133 IMB-9454G-R40 Save Changes and Exit Use the Save Changes and Exit option to save the changes made to the BIOS options and to exit the BIOS configuration setup program. Discard Changes and Exit Use the Discard Changes and Exit option to exit the BIOS configuration setup program without saving the changes made to the system.

  • Page 134: Software Drivers

    IMB-9454G-R40 Chapter Software Drivers Page 120 Page 120...

  • Page 135: Available Software Drivers

    IMB-9454G-R40 6.1 Available Software Drivers NOTE: The content of the CD may vary throughout the life cycle of the product and is subject to change without prior notice. Visit the IEI website or contact technical support for the latest updates.

  • Page 136: Figure 6-1: Installshield Wizard Preparation Screen

    IMB-9454G-R40 Figure 6-1: InstallShield Wizard Preparation Screen Step 3: The “Welcome” window in Figure 6-2 appears next. Figure 6-2: Welcome Screen Step 4: Click “N ” and the license agreement shown in Figure 6-3 appears. Page 122 Page 122...

  • Page 137: Figure 6-3: License Agreement

    IMB-9454G-R40 Figure 6-3: License Agreement Step 5: Agree to the license terms by clicking “Y ”. The “Readme” in Figure 6-4 appears. Figure 6-4: Readme Information Step 6: Click “Y ”. The driver is installed on the computer. After the installation is complete, the installation complete screen shown in Figure 6-5 appears.

  • Page 138: Vga Driver

    IMB-9454G-R40 Figure 6-5: Restart the Computer 6.3 VGA Driver To install the VGA driver, please follow the steps below: Step 1: Insert the Utility CD that came with the motherboard into the system CD drive. Step 2: Open the X:\2-VGA\WIN2K_XP directory (where X:\ is the system CD drive) and double-click the win2k_xp1420.exe installation file.

  • Page 139: Figure 6-6: Starting Install Shield Wizard Screen

    IMB-9454G-R40 Figure 6-6: Starting Install Shield Wizard Screen Step 4: The Preparing Setup window appears next (Figure 6-7). Figure 6-7: Preparing Setup Screen Step 5: A Welcome screen shown in Figure 6-8 appears. Click N to continue the Page 125...

  • Page 140: Figure 6-8: Vga Driver Installation Welcome Screen

    IMB-9454G-R40 installation. Figure 6-8: VGA Driver Installation Welcome Screen Step 6: A license agreement shown in Figure 6-9 appears. Read through the license agreement. Figure 6-9: VGA Driver License Agreement Step 7: Accept the terms and conditions stipulated in the license agreement by clicking...

  • Page 141: Figure 6-10: Vga Driver Installing Notice

    IMB-9454G-R40 the “Y ” button (Figure 6-9). The installation notice shown in Figure 6-10 appears. Figure 6-10: VGA Driver Installing Notice Step 8: After the driver installation process is complete, a confirmation screen shown in Figure 6-11 appears. Figure 6-11: VGA Driver Installation Complete...

  • Page 142: Realtek Lan Driver (For Gbe Lan) Installation

    IMB-9454G-R40 6.4 Realtek LAN Driver (for GbE LAN) Installation To install the Realtek LAN driver, please follow the steps below. Step 1: Open Windows Control Panel (Figure 6-12). Figure 6-12: Access Windows Control Panel Page 128 Page 128...

  • Page 143: Figure 6-13: Double Click The System Icon

    IMB-9454G-R40 Step 2: Double click the System icon (Figure 6-13). Figure 6-13: Double Click the System Icon Page 129...

  • Page 144: Figure 6-14: Double Click The Device Manager Tab

    IMB-9454G-R40 Step 3: Click the Hardware Tab, then double click Device Manager (Figure 6-14). Figure 6-14: Double Click the Device Manager Tab Step 4: A list of system hardware devices appears (Figure 6-15). Figure 6-15: Device Manager List Step 5: Double click the listed device that has question marks next to it.

  • Page 145: Figure 6-16: Search For Suitable Driver

    IMB-9454G-R40 Step 6: The Device Driver Wizard appears (Figure 6-16). Click N to continue. Figure 6-16: Search for Suitable Driver Page 131...

  • Page 146: Figure 6-17: Locate Driver Files

    IMB-9454G-R40 Step 7: Select “Specify a Location” in the Locate Driver Files window (Figure 6-17). Click N to continue. Figure 6-17: Locate Driver Files Page 132 Page 132...

  • Page 147: Realtek Audio Driver (Alc655) Installation

    IMB-9454G-R40 Step 8: Select the proper OS folder under the “X:\3-LAN\E:\3-LAN\Realtek RTL8111E” directory (Figure 6-18) in the location browsing window, where “X:\” is the system CD drive. Figure 6-18: Location Browsing Window Step 9: Click OK to continue. A driver files location menu window appears. Click N continue.

  • Page 148: Figure 6-19: Installshield Wizard Extracting Files

    IMB-9454G-R40 Figure 6-19: InstallShield Wizard Extracting Files Step 2: The Realtek AC’97 Audio Setup prepares the InstallShield Wizard (Figure 6-20). Figure 6-20: Audio Driver Install Shield Wizard Starting Step 3: The Setup Status screen appears as the driver is installed (Figure 6-21).

  • Page 149: Figure 6-21: Audio Driver Setup Preparation

    IMB-9454G-R40 Figure 6-21: Audio Driver Setup Preparation Step 4: At this stage the Digital Signal Not Found screen appears (Figure 6-22). Click to continue. Figure 6-22: Audio Driver Digital Signal Step 5: The audio driver installation continues (Figure 6-23). Page 135...

  • Page 150: Intel Matrix Storage Manager Installation

    IMB-9454G-R40 Figure 6-23: Audio Driver Installation Continues Step 6: After the driver installation process is complete, a confirmation screen appears (Figure 6-24). Figure 6-24: Audio Driver Installation Complete Step 7: The confirmation screen offers the option of restarting the computer now or later.

  • Page 151: Figure 6-25: Preparing Setup Screen

    IMB-9454G-R40 Step 1: Insert the Utility CD that came with the motherboard into the system CD drive. Step 2: Open the X:\5-SATA\ICH7R directory and double-click the iata60_cd.exe installation file. Step 3: The Preparing Setup window appears (Figure 6-25). Figure 6-25: Preparing Setup Screen Step 4: A Welcome screen shown in appears.
  • Page 152 IMB-9454G-R40 Step 9: The “Select Program Folder” window appears. Click on the N button to continue installing the driver. Step 10: After the driver installation process is complete, a confirmation screen shown in appears. Step 11: The confirmation screen shown in allows user to restart the computer immediately after the installation is complete or to restart the computer later.

  • Page 153: Abios Configuration Options

    IMB-9454G-R40 Appendix BIOS Configuration Options Page 139...

  • Page 154: O Ptions

    IMB-9454G-R40 A.1 BIOS Configuration Options Below is a list of BIOS configuration options described in Chapter 5. 　 System Overview ....................79 　 ATA/IDE Configuration [Compatible]..............83 　 Legacy IDE Channels [SATA Pri, PATA Sec]............84 　 IDE Master and IDE Slave ..................84 　...
  • Page 155 IMB-9454G-R40 　 Serial Port6 IRQ [10] ....................94 　 FAN 1 Mode Setting: [Full On]................95 　 Temperature 1 Limit of OFF..................95 　 Temperature 1 Limit of Start.................96 　 Temperature 1 Limit of Full...................96 　 Fan 1 Start PWM.....................96 　 Slop PWM 1: 0 PWM, 1 PWM (Default), 2 PWM, 4 PWM, 8 PWM, 16 PWM, 32 PWM or 64 PWM.......................96...
  • Page 156 IMB-9454G-R40 　 Resume On PCI-Express WAKE# [Enabled] ............ 102 　 MPS Revision [1.4]....................103 　 USB Configuration....................104 　 USB Devices Enabled..................104 　 USB Function [8 USB Ports]................104 　 USB 2.0 Controller [Enabled]................105 　 Legacy USB Support [Enabled]................. 105 　...

  • Page 157: Bwatchdog Timer

    IMB-9454G-R40 Appendix Watchdog Timer Page 143...
  • Page 158 IMB-9454G-R40 NOTE: The following discussion applies to DOS environment. IEI support is contacted or the IEI website visited for specific drivers for more sophisticated operating systems, e.g., Windows and Linux. The Watchdog Timer is provided to ensure that standalone systems can always recover from catastrophic conditions that cause the CPU to crash.
  • Page 159 IMB-9454G-R40 NOTE: When exiting a program it is necessary to disable the Watchdog Timer, otherwise the system resets. Example program: ; INITIAL TIMER PERIOD COUNTER W_LOOP: AX, 6F02H ;setting the time-out value BL, 30 ;time-out value is 48 seconds ; ADD THE APPLICATION PROGRAM HERE EXIT_AP, 1 ;is the application over?

  • Page 160: Cexternal Ac'97 Audio Codec

    IMB-9454G-R40 Appendix External AC’97 Audio CODEC Page 146 Page 146...

  • Page 161: Introduction

    IMB-9454G-R40 C.1 Introduction The motherboard comes with an on-board Realtek ALC655 CODEC. Realtek ALC655 is a 16-bit, full duplex AC’97 Rev. 2.3 compatible audio CODECwith a sampling rate of 48KHz. C.1.1 Accessing the AC’97 CODEC The CODEC is accessed through three phone jacks on the rear panel of the motherboard.

  • Page 162: Sound Effect Configuration

    IMB-9454G-R40 C.2 Sound Effect Configuration C.2.1 Accessing the Sound Effects Manager To access the Sound Effects Manager, please do the following: Step 1: Install the audio CODEC driver. Step 2: Click either: The Sound Effect Manager icon in the Notification Area of the system task bar (see Figure D-2), or The Sound Effect Manager icon in the Control Panel (see Figure D-3).

  • Page 163: Sound Effect Manager Configuration Options

    IMB-9454G-R40 FigureeC-4: Sound Effects Manager (ALC655) NOTE: The Sound Effect Manager shown in Figure D-4 is for the RealTek ALC655 audio CODEC. Different CODECs may have different sound manager appearances. The following section describes the different configuration options in the Sound Effect Manager.
  • Page 164 IMB-9454G-R40 NOTE: The Karaoke Mode is configured in the Sound Effect menu. To access Karaoke configuration settings, click on the Sound Effect menu tab. Sound Effect Karaoke Mode Equalizer Speaker Configuration Speaker Test S/PDIF-In S/PDIF-Out Connector Sensing HRTF Demo Microphone Effect...
  • Page 165 IMB-9454G-R40 that fits a certain vocal range. Equalizer Selection:- Preset equalizer settings enable easy audio range settings. Ten frequency bands can be configured. Speaker Configuration:- Multi-channel speaker settings are configured in this menu. Configurable options include: Headphone Channel mode for stereo speaker output Channel mode for 4 speaker output Channel mode for 5.1 speaker output...

Table of Contents