Equalizer-Section; Ac Power-Section - Omnitronic PAM-150 User Manual

DC/CHARGE/AC-SELECTOR
With the DC/Charge/AC-selector, you can switch the operation mode betweenDC , AC and charging.
LOW BATTERY LED

4.6 Equalizer-section

POWER LED
5-BAND GRAPHIC EQUALIZER
Used to fine-tune the master output. The frequencies are as follows: 100 Hz, 400 Hz, 1 kHz, 3 kHz and 6
kHz. They can be adjusted by ±15 dB.
LEVEL CONTROL
With the Level control, you can adjust the output signal of the Main Out-sockets or Monitor-sockets,
respectively.

4.7 AC power-section

AC INPUT SOCKET
Used to plug the power cord in.
FUSEHOLDER
Only replace the fuse when the device is disconnected from mains. Only use fuses of the same rating and
power.
POWER SWITCH
Press this button to start operation.
26/31 11038885_V_1_0.DOC