Advertisement
Table of Contents
- 1 Operating Instructions
- 2 Safety Instructions
- 3 Operating Determinations
- 4 Description of the Device
- 5 Front Panel
- 6 Rear Panel
- 7 Rack Installation
- 8 Switch-Adjustments
- 9 Operation Modes
- 10 Stereo Operation
- 11 Parallel Operation
- 12 Operation
- 13 Problem Chart
- 14 Cleaning and Maintenance
- 15 Replacing the Fuse
- Download this manual
See also:
User Manual
P-series power amplifiers
For your own safety, please read this user manual carefully
Every person involved with the installation, operation and maintenance of this device has to
- be qualilfied
- follow the instructions of this manual
- consider this manual to be part of the total product
- keep this manual for the entire service life of the product
- pass this manual on to every further owner or user of the product
- include every supplementay update with the original manual
INTRODUCTION
Thank you for having chosen an OMNITRONIC power amplifier. If you follow the instructions given in this
manual, we can assure you that you will enjoy this device for many years.
Unpack your amplifier.
Please make sure that there are no obvious transport damages. Should you notice any damages on the A/C
connection cable or on the casing, do not take the device into operation and immediately consult your local
dealer.
Features
Powerful amplifier
Enormous power with highest brilliance • 2 gain-controls on the frontpanel • All operation-modes controllable
via LEDs • LED-intensity adjustable via brightness control on the rear panel • Signal-inputs via XLR-female
or 1/4"-jack-socket • Speaker connection via lockable Speakon-plugs or Banana/screw combination • Ground
Lift-switch against humming • Bridged-switch for bridging • Many protection-circuits for optimized equipment-
protection • Very rugged housing • 19" dimensions • High power/weight-relation
SAFETY INSTRUCTIONS
Be careful with your operations. With a dangerous voltage you can suffer a dangerous
electric shock when touching the wires!
OPERATING INSTRUCTIONS
Keep this device away from rain and moisture!
Unplug mains lead before opening the housing!
before you initial start-up.
CAUTION!
CAUTION!
15/34
10451130_V_2_1.DOC
Advertisement
Table of Contents
Related Manuals for Omnitronic P-series
Summary of Contents for Omnitronic P-series
-
Page 1: Operating Instructions
- include every supplementay update with the original manual INTRODUCTION Thank you for having chosen an OMNITRONIC power amplifier. If you follow the instructions given in this manual, we can assure you that you will enjoy this device for many years. -
Page 2: Operating Determinations
This device has left our premises in absolutely perfect condition. In order to maintain this condition and to ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning notes written in this user manual. Important: Damages caused by the disregard of this user manual are not subject to warranty. -
Page 3: Description Of The Device
Operate the device only after having familiarized with its functions. Do not permit operation by persons not qualified for operating the device. Most damages are the result of unprofessional operation! Never use solvents or aggressive detergents in order to clean the device! Rather use a soft and damp cloth. Please use the original packaging if the device is to be transported. -
Page 4: Rear Panel
Rear panel (9) AC-CONNECTION Used to plug the power cord in. (10) FUSEHOLDER Only replace the fuse when the device is disconnected from mains. Only use fuses of the same rating and power. (11) LIMITER (12) MONO BRIDGE-OUTPUT SOCKET For connecting the speakers in bridged mode. (13) CH-2-SPEAKON-OUTPUT SOCKET For connecting the speakers of channel 2. -
Page 5: Switch-Adjustments
If racks are to be transported or used for mobile use, additionally fasten the devices by connecting the rear brackets with the side or ground bars of the rack. In this way, the amplifier cannot be pushed backwards. The front panel alone is not designed to absorb acceleration forces occuring during transportation. INPUTS A good cable run improves the sound quality remarkably. -
Page 6: Operation Modes
OPERATION MODES STEREO OPERATION Normal operation mode of an amplifier, in which every channel gets its own signal. The most commonly used mode of amplifiers is stereo-operation at 4 Ohms. Make sure that the operation-mode-switch Bridge/Dual/ Parallel is set to Dual. Calculation number of speakers –... -
Page 7: Operation
OPERATION After having connected your amplifier to the mains, turn both gain controls counter-clockwise to Min-position. The last device to be switched on is the amplifier. The "ON" and "PROTECT" LED light up now. If it does not, check if the amplifier is connected to the mains correctly. After the turn-on delay the speakers are activated (PROTECT-LED is off). -
Page 8: Cleaning And Maintenance
CLEANING AND MAINTENANCE DANGER TO LIFE! Disconnect from mains before starting maintenance operation! We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use alcohol or solvents! There are no servicable parts inside the device except for the fuse. Maintenance and service operations are only to be carried out by authorized dealers. - Page 9 TECHNICAL SPECIFICATIONS P-250 & P-500 P-250 P-500 Power supply: 115/230 V AC, 50/60 Hz ~ 115/230 V AC, 50/60 Hz ~ Power-range: 230 V ± 10 % (206 V - 253 V) 230 V ± 10 % (206 V - 253 V) Power consumption (max.): 475 W 675 W...
- Page 10 TECHNICAL SPECIFICATIONS P-1000, P-1500 & P-2000 P-1000 P-1500 P-2000 Power supply: 115/230 V AC, 50/60 Hz ~ 115/230 V AC, 50/60 Hz ~ 115/230 V AC, 50/60 Hz ~ Power-range: 230 V ± 10 % (206 V - 230 V ± 10 % (206 V - 253 V) 253 V) Power consumption...