Adaptec Snap Server 700i Series Service Manual page 3

Snap Server 700i Series
into place, making sure it is seated all the way into the chassis. The latch will click
in to indicate when it is locked.
You can now replace the top cover. Lower the cover onto the server, pushing it
3
forward from the rear of the server until it is firmly seated, and replace the screw
on the right side of the server.
Fold the handle down against the module.
4
Restoring Power to the Server
If you removed the server from the rack, replace it now with the help of another
1
person.
Reattach all cables to the rear of the server.
2
Press the power button on the front of the server.
3
Field Service Documentation
Copyright © 2007, Adaptec, Inc. All rights reserved. Information in this document is subject to change without notice and does not represent
a commitment on the part of Adaptec or any of its subsidiaries.
Upgrading to a Second Power Supply Module
3