Table of Contents
Advertisement
This is a workaround for OS without EHCI hand-off support. The EHCI owner-
ship change should claim by EHCI driver.
Hotplug USB FDD Support
A dummy FDD device is created that will be associated with the hot-plugged
FDD later. Auto option creates this dummy device only if there is no USB FDD
present.
USB Mass Storage Device Configuration
Figure 3.18 USB Mass storage Device Configuration
–
USB Mass Storage Reset Delay
Number of sends POST wait for the USB mass storage device after start unit
command.
–
Emulation Type
If Auto, USB devices less than 530MB will be emulated as a floppy drive and
the remaining as a hard drive. Force FDD option can be used to force a FDD
formatted drive to boot as FDD (Ex. ZIP drive).
37
ARK-1503 User Manual
Advertisement
Table of Contents
