Sony KP-43T90 Operating Instructions Manual page 56

Cannot receive upper channels
(UHF) when using an antenna
No color
Only snow and noise appear on
the screen
l
Make sure "Cable" is "Off" in the Channel Set Up menu. (see "Cable" on page 31)
l
Use "Auto Program" to add receivable channels that are not presently in the TV's memory. (see "Auto Program" on page 31)
l
Adjust "Color" in the Video menu. (see "Picture Adjustment" on page 26)
l
Black and white programs cannot be seen in color.
l
Perform AUTO SET UP again using the SET UP button to return to the factory preset condition. (see "To perform AUTO SET UP again" on page 19)
l
Check the "Cable" setting in the Channel Set Up menu. (see "Cable" on page 31)
l
Check the antenna/cable connections.
l
Make sure the channel is broadcasting programs.
l
Press ANT to change the input mode. (see "ANT" on page 22)
Dotted lines or strioes
TV is fixed to one channel
Double images or ghosts
Cannot operate the menu
l
Adiust the antenna
l
Keep the projection TV away from noise sources such as cars, neon signs or hair-dryers.
l
Use "Auto Program" to add receivable channels that are not presently in TV's memory. (see "Auto Program" on page 31)
l
Use a highly directional outdoor antenna or a cable (when the problem is caused by reflections from nearby mountains or tall buildings).
l
If the item you want to choose appears in gray, you cannot select it.
l
Press the projection TV's power button off and on again.
Cannot receive any channels
l
Make sure "Cable" is "On" in the Channel Set Up menu. (see "Cable" on page 31)
when using cable TV
l
Use "Auto Program" to add receivable channels that are not presently in the TV's memory. (see "Auto Program" on page 31)
Cannot gain enough volume when
l
Increase the volume at the cable box. Then press TV (FUNCTION) and adjust the projection TV's volume.
using a cable box
Favorite Channel does not display
l
Verify that "Favorite Channel" is set to "Manual" in the Channel Set Up menu. (see "Setting Favorite Channel manually" on page 32)
your choices
Some video sources do not
l
Ensure that "Video Label" is not set to "Skip." (see 'Video Label" on page 35)
appear when you press TV/VIDEO
Cannot play shooting games
l
Some shooting games which involve pointing a light beam at the TV screen with an electronic gun or rifle cannot be used with this projection TV. For
details, see the instruction manual supplied with the video game software.
Cannot display AUX input in the
l
The AUX input cannot be displayed in the PIP window picture. To view the VHF/UHF input in the PIP window, press the ANT button, then select the PIP
PIP window button. The AUX input will be shown in the main picture, and the VHF/UHF input will be displayed in the PIP window.
51